display system declaration switch

Function

This command is used to query the status of the law declaration switch. When you need to query whether the law declaration switch is enabled, run this command.

Format

display system declaration switch

Parameters

None

Modes

Common user mode

Level

Common user level

Usage Guidelines

You can run the system declaration switch command to configure the law declaration switch.

Example

To query the law declaration switch, do as follows:

huawei>display system declaration switch
 Command:
         display system declaration switch
Declaration switch : On

System Response

• The system displays the message "Declaration switch : xx" after the command is executed successfully. "xx" is "On" or "Off", depending on the actual state of the law declaration switch.
• For more information about the error message that the system displays against a command entered with incorrect syntax, see the "Syntax Check" in Parameter

More related:

What Caused Occasional NE Unreachability

How The SSE3LWF Board Reports the OTU_LOF Alarm When Interworking with the SSE1TMR

New- and Old-Model Boards on ASON Networks of WDM Products