In fiber-to-the-premises systems, the signal is transmitted to the customer premises using fiber optic technologies. Unlike many conventional telephone technologies, this does not provide power for premises equipment, nor is it suitable for direct connection to customer equipment. An ONT (optical network terminal) is used to terminate the fiber optic line, demultiplex the signal into its component parts (voice telephone, television, and Internet), and provide power to customer telephones. As the ONT must derive its power from the customer premises electrical supply, many ONTs have the option for a battery backup, to maintain service in the event of a power outage. As one of the important part, ONT terminal directly affect the reliability of the entire solution, maintainability and scalability.
Bridge
Huawei HG8010 System Description
| Price | USD70.00 |
| Interface type | User network Interface ：1GE |
| length/width/height | 143mm×115mm×30mm |
| Power supply | Power adapter input: 100–240 V AC, 50–60 Hz
Power supply to the board: 11~14 V DC, 1A
Support Li Battery backup
|
| Power consumption | Maximum power consumption (including power adapter) < 6.2 W
Average power consumption (including power adapter) < 5.2 W
|
| Working environment | Operating temperature: 0°C to 40°C
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support mapping the traffic stream to the GEM port by VLAN / PRI /
VLAN + PRI / IPTOS / Physical port
| |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support rogue ONT detection and isolation | |
| Support IPv6 transparently passthrough in L2 mode and MLD snooping |
Huawei HG861 System Description
| Interface type | User network Interface ： 1GE +1RF |
| length/width/height | 212mm×163mm×45mm |
| Fiber spooling | Support |
| Power supply | Power adapter input: 100–240 V AC, 50–60 Hz
Power supply to the board: 11~14 V DC, 1A
Support Li Battery backup
|
| Power consumption | Maximum power consumption (including power adapter) < 9.5W
Average power consumption (including power adapter) < 7.5 W
Static Power Consumption (including
Power adapter)<4.5W
|
| Working environment | Operating temperature: 0°C to 40°C
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support mapping the traffic stream to the GEM port by VLAN / PRI /VLAN + PRI / IPTOS / Physical port | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support RF switch remote control and convenient for CATV operation | |
| Support the WEB, support OMCI protocol (Feb, 2008 standard) for configuration and provisioning | |
| Support all Ethernet messages transparent transmission based on service flow | |
| Support the software dual-backup and rollback | |
| Support CATV，RF output: 17dBmV/Ch, average received power: -8 dBm～+2 dBm |
Huawei HG863 System Description
| Interface type | User network Interface ： 4GE |
| length/width/height | 180mm×135mm×30mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100–240 V AC, 50–60 Hz
Power supply to the board: 11~14 V DC, 1A
Support Li Battery backup
|
| Power consumption | Maximum power consumption (including power adapter) < 11W
Average power consumption (including power adapter) < 8 W
Static Power Consumption (including
Power adapter)<6W
|
| Working environment | Operating temperature: 0°C to 40°C
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support mapping the traffic stream to the GEM port by VLAN / PRI /VLAN + PRI / IPTOS / Physical port | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support up to 2000 bytes of Ethernet frames | |
| Support the WEB page, support OMCI protocol (Feb, 2008 standard) for configuration and provisioning | |
| Support optical module monitor | |
| Support backup battery monitor |
Bridge + Voip
Huawei HG8110 System Description
| Interface type | User network Interface ：1GE+1POTS |
| length/width/height | 143mm×115mm×30mm |
| Power supply | Power adapter input: 100–240 V AC, 50–60 Hz
Power supply to the board: 11~14 V DC, 1A
Support Li Battery backup
|
| Power consumption | Maximum power consumption (including power adapter) < 7 W
Average power consumption (including power adapter) < 6 W
|
| Working environment | Operating temperature: 0°C to 40°C
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support mapping the traffic stream to the GEM port by VLAN / PRI /
VLAN + PRI / IPTOS / Physical port
| |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support rogue ONT detection and isolation | |
| Support IPv6 transparently passthrough in L2 mode and MLD snooping |
Huawei HG850a System Description
| Interface type | User network Interface ： 4FE+2POTS |
| length/width/height | 195mm×155mm×33mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100–240 V AC, 50–60 Hz
Power supply to the board: 11~14 V DC, 1A
Support Li Battery backup
|
| Power consumption | Maximum power consumption (including power adapter) < 10W
Average power consumption (including power adapter) < 8 W
Static Power Consumption (including
Power adapter)<5W
|
| Working environment | Operating temperature: 0°C to 40°C
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support mapping the traffic stream to the GEM port by VLAN / PRI /VLAN + PRI / IPTOS / Physical port | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H248 protocols | |
| Support simple routing function (PPPOE/DHCP Server/NAT/ALG) | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) for configuration and provisioning, support provisioning voice and layer 3 services through OMCI | |
| Support the software dual-backup and rollback |
Huawei HG8240 System Description
| Price | USD73.00 |
| Interface type | User network Interface ： 4GE+2POTS |
| length/width/height | 195mm×155mm×34mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100V～240V AC，50Hz～60Hz
Power supply to the board: 11V -14V DC，1A
Support Li battery backup, support backup battery monitoring
|
| Power consumption | Maximum power consumption (including power adapter) < 12W
Average power consumption (including power adapter) < 7.5W
Static Power Consumption (including
Power adapter)<6W
|
| Working environment | Operating temperature: 0℃～+40℃
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support IPv6 transparently passthrough in L2 mode and MLD snooping | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H.248 | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) for configuration and provisioning | |
| Support optical module monitor |
Huawei HG8242 System Description
| Interface type | User network Interface ： 4GE+2POTS+1RF； |
| length/width/height | 268mm×213mm×34mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100V～240V AC，50Hz～60Hz
Power supply to the board: 11V -14V DC，2A
Support Li battery backup, support backup battery monitoring
|
| Power consumption | Maximum power consumption (including power adapter) < 14W
Average power consumption (including power adapter) < 10.5W
Static Power Consumption (including
Power adapter)<5W
|
| Working environment | Operating temperature: 0℃～+40℃
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support IPv6 transparently passthrough in L2 mode and MLD snooping | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H.248 | |
| Support rogue ONT detection and isolation | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) for configuration and provisioning | |
| Support optical module monitor |
Huawei Home Gateway
Huawei HG8245 System Description
| Price | USD83.00 |
| Interface type | User network Interface ： 4GE+2POTS+1USB+WiFi； |
| length/width/height | 195mm×174mm×34mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100V～240V AC，50Hz～60Hz
Power supply to the board: 11V -14V DC，2A
Support backup battery, support backup battery monitoring
|
| Power consumption | Maximum power consumption (including power adapter) < 17W
Average power consumption (including power adapter) < 8W
Static Power Consumption (including
Power adapter)<6.5W
|
| Working environment | Operating temperature: 0℃～+40℃
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support NAT / DHCP server / firewall / UPnP / ALG / virtual server /port triggering / DMZ / IGMP proxy | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H.248 | |
| Support rogue ONT detection and isolation | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) and TR069 for configuration and provisioning | |
| Support optical module monitor | |
| Support IEEE 802.11b/g/n |
Huawei HG8247 System Description
| Interface type | User network Interface ： 4GE+2POTS+1RF＋WiFi＋1USB |
| length/width/height | 268mm×213mm×34mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100V～240V AC，50Hz～60Hz
Power supply to the board: 11V -14V DC，2A
Support backup battery, support backup battery monitoring
|
| Power consumption | Maximum power consumption (including power adapter) < 19.5W
Average power consumption (including power adapter) < 11W
Static Power Consumption (including
Power adapter)<6.5W
|
| Working environment | Operating temperature: 0℃～+40℃
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support NAT / DHCP server / firewall / UPnP / ALG / virtual server /port triggering / DMZ / IGMP proxy | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H.248 | |
| Support rogue ONT detection and isolation | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) and TR069 for configuration and provisioning | |
| Support optical module monitor | |
| Support CATV，RF output: 17dBmV/Ch, mean received optical power：-8 dBm～+2 dBm |
Huawei HG8447 System Description
| Interface type | User network Interface ： 4GE+4POTS+1RF＋WiFi＋1USB |
| length/width/height | 268mm×213mm×34mm |
| Fiber spooling | Nonsupport |
| Power supply | Power adapter input: 100V～240V AC，50Hz～60Hz
Power supply to the board: 11V -14V DC，2A
Support backup battery, support backup battery monitoring
|
| Power consumption | Maximum power consumption (including power adapter) < 18W
Average power consumption (including power adapter) < 11W
Static Power Consumption (including
Power adapter)<6.5W
|
| Working environment | Operating temperature: 0℃～+40℃
Operating humidity: 5% to 95% (non-condensing)
|
|
Main features
| Support 8 T-CONT, 32 GEM port |
| Support NAT / DHCP server / firewall / UPnP / ALG / virtual server /port triggering / DMZ / IGMP proxy | |
| Support 1024 MAC address entries, Support up to 255 multicast groups | |
| Support SIP and H.248 | |
| Support rogue ONT detection and isolation | |
| Support WEB，support OMCI protocol (Feb, 2008 standard) and TR069 for configuration and provisioning | |
| Support optical module monitor | |
| Support CATV，RF output: 17dBmV/Ch, mean received optical power：-8 dBm～+2 dBm |
As a world leading Huawei networking products supplier, Huanetwork wholesales original new Huawei networking equipments, and have Huawei ONTs in stock. If you have such requirement please contact your sales person, if you are new customer, please feel free to contact sales@huanetwork.com. We can also provide network design, products installation and configuration, trouble shooting etc.
More blog:
No comments:
Post a Comment