Failing to Add IMA Boards into the DPS Protection Group

IMA boards fail to be added into the DPS protection group, hence failing to realize the DPS protection.

Product

• OptiX OSN 1500A/1500B
• OptiX OSN 2500
• OptiX OSN 3500 II
• OptiX OSN 3500
• OptiX OSN 7500

Fault Type

Configuration_Problem

Symptom

Boards fail to be added into the DPS protection group.

The configuration of the DPS protection fails to be performed. The boards fail to be added into the DPS protection group.

Cause Analysis

IMA boards that are added into the DPS protection group must be inserted in the paired slots.

Procedure

1. Make sure that the IMA boards that are configured with DPS protection are set to the paired slots.

Reference Information

None.

How to Change the Link Type of an Interface?

10G Card Issue in Quidway S5300

In S5700 when configuring voice vlan there is an error says “no enough resources”