Querying the Physical State of a POTS Port

This topic describes how to verify whether a POTS port is in the normal state by querying the physical state of the POTS port on the NMS.

Prerequisites

• The user is a user with the operator authority or higher.
• The OLT and the NMS communicate with each other properly.
• The NMS is able to discover an online ONT and VoIP service parameters are configured.

Procedure

1. In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.
2. Choose GPON > GPON Management from the navigation tree.
3. On the GPON ONU tab page, set the filter criteria or click  to display the GPON ONUs.
4. Select a required record from the ONT list, and then click the Current ONU: UNI Port Info tab in the lower pane.
5. View the icons in column Status, as shown in the following figure. You can see the icon meanings directly.

More blog:

How to Change the Link Type of an Interface?

10G Card Issue in Quidway S5300

In S5700 when configuring voice vlan there is an error says “no enough resources”