(Optional) Configuring the Overseas Parameters

By default, the overseas parameters are configured according to the Chinese standards. In the actual service configuration, the attributes such as the upper and lower thresholds of the flash-hooking duration can be configured according to the local standards to ensure that the response of the user terminal complies with the local standards. Thunder-link provide OLT, MA5683T, MA5680T

Procedure

1. Run the oversea parameters command to configure the overseas parameters.
2. Run the display oversea parameters command to check whether the overseas parameters are the same as those in the data plan.

Example

To set the upper flash-hooking threshold (overseas feature parameter 0) to 800 ms (in compliance with the Hong Kong standard) and the lower flash-hooking threshold (overseas feature parameter 1) to 100 ms (in compliance with the Hong Kong standard), do as follows:

huawei(config)#oversea parameters 0 800
huawei(config)#oversea parameters 1 100
huawei(config)#display oversea parameters
{ <cr>|name<U><0,99> }:                                                          
                                                                                
  Command:                                                                      
          display oversea parameters                                            
  ----------------------------------------------------------------------------- 
  Parameter name index: 0     Parameter value: 800                              
  Mean: Hooking upper threshold(ms), reference: China:350, HongKong:800         
  ----------------------------------------------------------------------------- 
  Parameter name index: 1     Parameter value: 100                               
  Mean: Hooking lower threshold(ms), reference: China:100, HongKong:100         
  ----------------------------------------------------------------------------- 
  Parameter name index: 2     Parameter value: 0                                
  Mean: Flag of applying PARKED LINE FEED or not when user port is locked, 0:not
 apply, 1:apply                                                                 
  ----------------------------------------------------------------------------- 
  Parameter name index: 3     Parameter value: 0                                
  Mean: The detect time of flash upper limit to onhook, default value: 0ms      
  ----------------------------------------------------------------------------- 
  Parameter name index: 4     Parameter value: 0                                
  Mean: DTMF Detector Tuning, 0:Q.24, 1:Russia                                  
----------------------------------------------------------------------------- 
  Parameter name index: 5     Parameter value: 0                                
  Mean: Flag of changing TEI value for software switch, 0:no change, 1:set TEI  
value to 1, 2:set TEI value to 0. Default: 0                                    
  ----------------------------------------------------------------------------- 

Related:

What’s the Failure of I-Type PDU Backplane on MA5600T due to Overcurrent


How to Assemble an IMPI on the MA5620G?



What is the command lines that we can use on the OLT to detect PRTE board status