display system encoding

Function

This command is used to query the encoding mode of the system. After this command is executed successfully, the current encoding mode of the system is displayed on the interface. If you do not set the encoding mode of the system, the default encoding mode is displayed.

Format

display system encoding

Parameters

None

Modes

Common user mode, Huawei OSN3500, MA5683T

Level

Operator level

Usage Guidelines

• Log in to the device and run this command to display the current encoding mode of the system. If you do not set the encoding mode of the system, the default encoding mode is displayed.
• You can run the system encoding command to set the encoding mode of the system.

Example

To query the current encoding mode of the system, do as follows:

huawei>display system encoding
  current system encoding : GBK

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to the display system encoding command.

  Parameter	Description	Description
  current system encoding	Indicates the encoding mode of the system.	Enumerated type. Options: GBK, ISO8859-1, and UTF-8.

• For more information about the error message that the system displays against a command entered with incorrect syntax, see the "Syntax Check" in Parameter.

More related:

The IN_PWR_HIGH Alarm Indicating Source Optical Module Faults

XFP not supporting FC800 services OSN8800 TN55TQX

10GE LAN link flapping on customer router due to SNCP switch