EPON Access Port Management(clear port statistics)

clear port statistics(epon)

Function

This command is used to clear the LLID-based packet statistics of a PON port on the OLT. After the statistics are cleared, the system starts to collect statistics again.

Format

clear port statistics portid

Parameters

Parameter	Description	Value
portid	Indicates the ID of the EPON port.	Please see Differences Between Shelves.

Modes

EPON mode, MA5683T, MA5680T

Level

Operator level

Usage Guidelines

• Run the config command to enter global config mode and then run the interface epon command to enter EPON mode.
• You can clear the traffic statistics of a PON port only when the ONT is online.

Example

To clear the packet statistics of EPON port 0/3/0, do as follows:

huawei(config-if-epon-0/3)#clear port statistics
{ portid<U><0,7> }:0

    Command:                                                                      
          clear port statistics 0

System Response

• The system does not display any message after the command is executed successfully.

MORE:

When compatible stp mode in S5700 Huawei switch with pvst in cisco switches?

When OSN 1500 R1PCXLN board fails to query optical power due to software BUG?

When the NMS Fail to Synchronize ONUs.