Wednesday, November 9, 2016

GPON ONT Service Profile Configuration(port igmp-forward )

port igmp-forward (gpon profile)

Function

This command is used to configure the IGMP packet forwarding mode of an ONT port in a GPON ONT service profile. In different IGMP packet forwarding modes, the upstream IGMP packet from the ONT to network-side are different.
  • When the user-side packets are strictly planned, the IGMP packet forwarding mode of the ONT is different selected.
    • If the ONT is directly connected to the home gateway, select the translation mode.
    • If the ONT is directly connected to the set-top box (STB) or PC, select the default mode.
  • When the packets for the such services as games are unknown IGMP packets and need to be transparently transmitted to the upper-layer device for processing, select transparent.
  • When the ONT does not support setting the IGMP packet forwarding mode or the OLT does not specify the ONT IGMP packet forwarding mode, select the unconcern mode.
By default, the IGMP packet forwarding mode of the ONT port in the GPON ONT service profile is unconcern. Certain ONTs do not support setting the IGMP packet forwarding mode, and the default forwarding mode used after an ONT is added is unconcern. In this manner, the ONT configuration restoration is not affected.

Format

port igmp-forward { eth | vdsl } ont-portlist {{{ translation | default } vlanid [ priority ] } | transparent }
undo port igmp-forward { eth | vdsl } ont-portlist

Parameters

Parameter Description Value
eth Indicates the ONT Ethernet port. -
vdsl Indicates the ONT VDSL port. -
ont-portlist Indicates all the ports on which the priority and forwarding mode of IGMP packets are to be set. This parameter supports comma (,) and en dash (-). For example, ont-portlist of 0, 2-3 indicates ONTs 0, 2,3. Character string type, a string of 1-128 characters.
translation Sets the forwarding mode of IGMP packets to translation. Only switching mode 1:1 is supported.
In network application, the VLAN tags carried by user-side packets are different and the VLANs need to be planned on the optical line terminal (OLT). In translation mode, the ONT switches the VLAN tags of user-side packets to new VLAN tags and then forwards the packets to the OLT. If the VLAN tags carried by user-side packets have been planned, the ONT does not need to translate the VLAN tags of IGMP packets by translation parameter again.
-
default Sets the forwarding mode of the IGMP packets to default tag, the ONT adds a new VLAN tag to the user-side packets and then forwards the packets upstream to the OLT. -
vlanid
Sets the VLAN used in the translation or default mode after this command is executed.
  • In translation mode, specify the VLAN tag used after VLAN switching.
  • In default mode, specify the VLAN tag that is added to packets on the ONT.
Numeral type. Range: 0-4095.
priority You can determine whether to specify the priority of the IGMP packets according to requirements after the forwarding mode is set to translation or default. If you do not specify this parameter, user packets are transmitted upstream to the OLT using the original priority. a greater value indicates a higher priority. Numeral type. Range: 0-7.
transparent Sets the IGMP packet forwarding mode to transparent. The ONT does not process VLAN tags of all user-sides packets including broadcast packets and multicast packets but only forwards these packets upstream to the other side. -

Modes

GPON ONT service profile mode, GPBD

Level

Operator level

Usage Guidelines

  • Run the config command to enter global config mode, and then run the ont-srvprofile gpon command to enter GPON ONT service profile mode.
  • You can run the display ont-srvprofile gpon command to query the IGMP packet forwarding mode on the ONT port in the GPON ONT service profile.
  • This command conflicts with the igmp-forward(gpon profile) command for configuring the ONT-based VLAN translation function.

Example

To set the forwarding mode of IGMP packets on Ethernet ports 1 and 2 to transparent in GPON ONT service profile 10, do as follows:
huawei(config-gpon-srvprofile-10)#port igmp-forward eth
{ ont-portlist<S><Length 1-128> }:1-2
{ default<K>|translation<K>|transparent<K> }:transparent

  Command:
          port igmp-forward eth 1-2 transparent   
  Set ONT port(s) IGMP forward configuration, success: 2, failed: 0 
To delete the forwarding mode setting of IGMP packets on Ethernet ports 1 and 2 in ONT service profile 10, do as follows:
huawei(config-gpon-srvprofile-10)#undo port igmp-forward eth
{ ont-portlist<S><Length 1-128> }:1-2

  Command:
          undo port igmp-forward eth 1-2
  Delete ONT port(s) IGMP forward configuration, success: 2, failed: 0

System Response

  • The system displays the message "Set ONT port(s) IGMP forward configuration, success: x, failed: y" after the forwarding mode of IGMP packets is set successfully. "x" indicates the number of ports on which the forwarding mode is set successfully and "y" indicates the number of ports on which the forwarding mode fails to be set.
MORE BLOG:

No comments:

Post a Comment