The MSTP Configuration on reset stp region-configuration

Function Description

The multiple spanning tree protocol (MSTP) applies to the redundant network. MSTP is an improvement of STP and RSTP. MSTP prevents the proliferation and infinite cycling of the packets in the loop network. In addition, MSTP provides multiple redundant paths for VLAN data transmission to achieve the load-sharing purpose. The MA5680T/MA5683T/MA5608T supports MSTP, which is compatible with the STP and RSTP. It supports MSTP loop network that helps meet various networking requirements.

Function

This command is used to restore the configurations of a Multiple Spanning Tree (MST) region to the default values. To quickly restore the default values of the all the configuration data in an MST region, run this command to restore all the default values at one time.

Format

reset stp region-configuration

Parameters

None

Modes

Global config mode

Level

Operator level

Usage Guidelines

The default configurations of an MST region are as follows:

• The MST region name is the MAC address of the device.
• All the VLANs are mapped to the Common and Internal Spanning Tree (CIST) instance (instance 0).
• The Multiple Spanning Tree Protocol (MSTP) modification level is 0.

Example

To restore the default values of an MST region, do as follows:

huawei(config)#reset stp region-configuration                                   
  STP resets region configuration,it may take several minutes,are you sure to   
reset region configuration? [Y/N][N]y  
  Command is being executed. Please wait: 100%

System Response

• The system does not display any message after the command is executed successfully.

More blog:

When the NMS Fail to Synchronize ONUs.

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

When Display Change of Service Ports and Service Failure in the MA5600T?