What's the Configuration Restoration Commands on adsl interleaved-depth(cfgfile)?

Function Description

Configuration restoration commands are stored only in configuration files and automatically executed only at the configuration restoration stage. Users cannot and do not need to manually run these commands

Function

This command is a configuration and recovery command and stored in the configuration file. It is automatically executed in the configuration recovery phase or during script loading. This command is used to set the maximum asymmetric digital subscriber line (ADSL) interleave depth. The greater the interleave depth is, the better the line quality is, and the stronger the error correction is but the transmission rate decreases. Different carriers require different interleave depths. To set the maximum interleave depth, run this command.

Format

adsl interleaved-depth maximum-depth-ds

Parameters

Parameter	Description	Value
maximum-depth-ds	Sets the maximum ADSL interleave depth.	Numeral type. Range: 64 and 511. Default value: 511.

Modes

Global config mode, ADEE, ADLE

More Blog:

When cannot log-in MSUITE of U2000V1R3.

How to change the OLT type device?

How many Remote frame ( RSU with HABD ) can UA5000-PVM board support?