Function Description
This topic describes the commands related to the non xDSL and non xPON port configuration and query.Function
This command is used to query the real-time data transmitting/receiving rate
of the port, that is the transmitting/receiving traffic. When you need to query
the receiving traffic, transmitting traffic, and traffic index table of a port,
run this command.
Format
display traffic frameid/slotid/portid [
channel channelid ]
Parameters
| Parameter | Description | Value |
|---|---|---|
| frameid/slotid/portid | Indicates the subrack ID, slot ID, and port ID. Enter "/" between the subrack, slot and port IDs. | Please see Differences Between Shelves. |
| channel channelid | Indicates the channel number. When you need to query the real-time data transmitting/receiving rate of the specified port, use this parameter. Currently, only VDSL supports it. | Numeral type. Range: 1-2. |
Level
Operator level
Usage Guidelines
The command is supported only by the ADSL, VDSL, SHDSL, AIUG, OPFA and OPGD
boards.
Example
To query the real-time data receiving/transmitting rate of port 0/3/0, do as follows:
huawei#display traffic
{ frame/slot/port<S><Length 5-8>|table<K>|vlan<K> }:0/3/0
{ <cr>|channel<K> }:
Command:
display traffic 0/3/0
Querying, please wait...
--------------------------------------------------------------
Frame/Slot/Port Rx Traffic(Kbps) Tx Traffic(Kbps)
--------------------------------------------------------------
0/3/0 0.0 0.0
--------------------------------------------------------------
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
display traffic0/3/0 command.
Parameter Description Frame/Slot/Port Indicates the subrack ID, slot ID, and port ID. Rx Traffic(Kbps) Indicates the receiving traffic, in the unit of kbit/s. Tx Traffic(Kbps) Indicates the transmitting traffic, in the unit of kbit/s.
More Blog:
No comments:
Post a Comment