The ONT Broadband Service Management of display ont mac-count

Function Description

This topic provides the commands related to the ONT broadband service configuration

Function

This command is used to query the ONT MAC address learning table.

Format

display ont mac-count portid ontid

Parameters

Parameter	Description	Value
portid	Indicates the ID of the GPON port where the ONT to be queried is located.	Please see Differences Between Shelves.
ontid	Indicates the ID of the ONT to be queried.	Numeral type. Range: varies with the board type.

Modes

GPON mode, GPBD, GPFD

Level

Operator level

Usage Guidelines

• Before running this command, run the config command to enter global config mode, and then run theinterface gpon command to enter GPON mode.
• The ONT must be online and working properly.

Example

To query the MAC address learning table of the ONT whose ID is 0 under GPON port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#display ont mac-count                                
{ portid<U><0,7> }:0                                                            
{ ontid<U><0,63> }:0                                                            
                                                                                
  Command:                                                                      
          display ont mac-count 0 0                                             
  --------------------------------------------------                            
  F/S/P                    : 0/3/0   
  ONT-ID                   : 0                                                 
  ONT MAC count            : 0                                                  
  --------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to the display ont mac-count command.

  Parameter	Description
  F/S/P	Indicates the shelf ID, slot ID, and port ID.
  ONT-ID S	Indicates the ONT ID.
  ONT MAC count	Indicates the number of the MAC addresses currently learned by the ONT.

More Blog:

How much buffer we need on the VDSF board to convert VDSL2 frame?

When cannot log-in MSUITE of U2000V1R3.

How to change the OLT type device?