Showing posts with label HG8245H. Show all posts

Thursday, December 29, 2016

The ONT Ethernet OAM Configuration on display cfm

Function

The display cfm command is used to query the global connectivity fault management (CFM) configuration of a specified ONT. The ONT CFM is enabled by default.

Format

display cfm frameid/slotid/portid ontid

Parameters

Parameter	Description	Value
frameid/slotid/portid	Used to identify the frame ID, slot ID, and port number. "/" must be input.	Please see Differences Between Shelves.
ontid	Indicates the ONT ID. This parameter and the frameid/slotid/portid identify a unique ONT.	Numeral type. Range: varies with the board type.

Modes

ONT ETH OAM mode, HG8245H, HG8245A

Level

Operator level

Usage Guidelines

Run the config command to enter the global configuration mode. Then, run the ont-ethoam command to enter the ONT ETH OAM mode.

Example

To query the global configuration of CFM of ONT 0 on port 0/2/0, do as follows:

huawei(config-ont-ethoam)#display cfm 0/2/0 0
  Command:
          display cfm 0/2/0 0
  CFM Global Status        : disable

System Response

The system displays the queried result when the command runs successfully.
The following table describes the parameters in response to the command.

Parameter Description

CFM Global Status Indicates the global CFM enable status. You can run the cfm command for configuration.

Parameter	Description
CFM Global Status	Indicates the global CFM enable status. You can run the cfm command for configuration.

More blog:

Broadcast storm occured in S5300 when STP was ruuning

When Failed to get the SNCP state of N3EAS2 board, NMS error code 38752

When compatible stp mode in S5700 Huawei switch with pvst in cisco switches?

Wednesday, December 21, 2016

ONT Backup Power Management Profile Configuration on display ont power-shedding-profile

Function

This command is used to query the information about an optical network terminal (ONT) backup power management profile. Service running status on an ONT after the ONT is powered off are configured in the ONT(like HG8245H) backup power management profile. The profile is used to control the service running status on an ONT after the ONT is powered off.

Format

display ont power-shedding-profile { all | profile-id profile-id-value | profile-name profile-name-value }

Parameters

Parameter	Description	Value
all	Queries the basic information about all the ONT backup power management profiles, including profile ID, profile name, and bound times..	-
profile-id profile-id-value	Queries the detailed information about a specific ONT backup power management profile based on the ID.	Numeral type. Range: 1-16.
profile-name profile-name-value	Queries the detailed information about a specific ONT backup power management profile based on the name.	Character string type, a string of 1-32 characters.

Modes

Privilege mode, GPON mode, diagnose mode

Level

Operator level

Usage Guidelines

Run the configcommand to enter the global config mode, and then run the interface gpon command to enter GPON mode.
In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.
You can run the ont power-shedding-config(gpon) command to bind an ONT to the profile after the ONT backup power management profile that meets the service requirements is obtained.

Example

To query the information about all the ONT backup power management profiles, do as follows:

huawei#display ont power-shedding-profile                  
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:all                                    
                                                                                
  Command:
          display ont power-shedding-profile all
 ----------------------------------------------------------------------------
 Profile ID    Profile name                                Binding times
 ----------------------------------------------------------------------------
 1             power-shedding-profile_1                    0
 2             power-shedding-profile_2                    0
 3             power-shedding-profile_3                    0
 4             power-shedding-profile_4                    0
 5             power-shedding-profile_5                    0
 6             abc                                         0
 ----------------------------------------------------------------------------

To query the information about ONT backup power management profile 5, do as follows:

huawei#display ont power-shedding-profile                                    
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:profile-id                             
{ profile-id-value<U><1,16> }: 5                                                      
                                                                                
  Command:
          display ont power-shedding-profile profile-id 5
 ---------------------------------------------------------------------
 Profile ID    : 5
 Profile name  : power-shedding-profile_5
 Binding times : 0
 ---------------------------------------------------------------------
 Data class shedding interval                  : 5 (second)
 Voice class shedding interval                 : 4 (second)
 Video overlay class shedding interval         : Immediate down
 Video return class shedding interval          : Disable
 DSL class shedding interval                   : Disable
 ATM class shedding interval                   : Disable
 CES class shedding interval                   : Disable
 Frame class shedding interval                 : Disable
 Sdh-sonet class shedding interval             : Disable
 Service restore interval after power restore  : Immediate restore
 ---------------------------------------------------------------------

System Response

The system displays the queried result when the command runs successfully.

The following table describes the parameters in response to the command.

Parameter	Description
Profile ID	Indicates the ID of an ONT backup power management profile.
Profile name	Indicates the name of an ONT backup power management profile.
Binding times	Indicates the times the ONT backup power management profile is bound.
Data class shedding interval	Indicates the hold time of the data service.	Unit: s. You can run ont power-shedding-profile add command to set this parameter. 0 maps Disable, and 1 maps Immediate down.
Voice class shedding interval	Indicates the hold time of the voice service.
Video overlay class shedding interval	Indicates the hold time of the video overlay service.
Video return class shedding interval	Indicates the hold time of the video transmitting service.
DSL class shedding interval	Indicates the hold time of the DSL service.
ATM class shedding interval	Indicates the hold time of the ATM service.
CES class shedding interval	Indicates the hold time of the CES service.
Frame class shedding interval	Indicates the hold time of the non-Ethernet data service.
Sdh-sonet class shedding interval	Indicates the hold time of the Sdh-sonet service.
Service restore interval after power restore	Indicates the interval for service restoring after the power supply recovers.

More related:

When End-to-End GE Services Cannot Be Created on the OptiX OSN 6800?

How to Use the Multimeter to Check Whether the A32 Board Is Faulty?

Due to disabling TDC-ADJUSTENABLE function high Bit errors on NS3 card

EPON ONT Line Profile Configuration on display ont-lineprofile current

Function

This command is used to query the current configuration information about the specified EPON ONT line profile, including the configuration information about the EPON ONT line profile which has not taken effect by running commit command. When you need to check whether the related line parameters have been configured in the EPON ONT line profile, run this command.

Format

display ont-lineprofile current

Parameters

None.

Modes

EPON ONT line profile config mode, HG8245H

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the ont-lineprofile epon command to enter EPON ONT line profile configuration mode.
You can run the display ont-lineprofile epon command to query the information about the EPON ONT line profile in the system which has taken effect by running commit command.

Example

To query the current configuration information about EPON ONT line profile 10, do as follows:

huawei(config-epon-lineprofile-10)#display ont-lineprofile current
                                                                                
  Command:                                                                      
          display ont-lineprofile current                            
  ---------------------------------------------------------------------         
  Profile-ID          :10                                                              
  Profile-name        :line-profile_10                                                 
  Access-type         :EPON                                                            
  ---------------------------------------------------------------------         
  FEC switch          :Disable                                   
  Encrypt type        :off                                       
  DBA Profile-ID      :9                                         
  Traffic-table-index :6                                         
  Traffic-table-name  :ip-traffic-table_6
  TR069 IP index      :0
  Dba-threshold       :                                          
  ---------------------------------------------------------------------         
    Queue-set-index  Q1    Q2    Q3    Q4    Q5    Q6    Q7    Q8               
  ---------------------------------------------------------------------         
    1                -     -     -     -     -     -     -     -                
    2                -     -     -     -     -     -     -     -                
    3                -     -     -     -     -     -     -     -                
  ---------------------------------------------------------------------         
  Binding times       :0                                         
  ---------------------------------------------------------------------

System Response

The system displays the queried result when the command runs successfully.

The following table describes the parameters in response to the command.

NOTE:

In the interface, "-" indicates that the item is not configured.

Parameter	Description
Parameter	Meaning	Remark(Configuration Command)
Profile-ID	Indicates the ID of an EPON ONT line profile.	It can be specified in the ont-lineprofile epon command when configuring an EPON ONT line profile.
Profile-name	Indicates the name of an EPON ONT line profile.
Binding times	Indicates the binding times of EPON ONT line profiles.	There are two methods to bind an ONT to an EPON ONT line profile. Run the ont add(epon) command to add an ONT offline, and bind the ONT to an EPON ONT line profile. Run the ont add(epon) command to confirm an automatically discovered ONT, and bind the ONT to an EPON ONT line profile.
Access-type	Indicates the access type of an EPON ONT line profile. Option: EPON.	-
FEC switch	Enables or disables the FEC function of an EPON ONT line profile. Options: Enable and Disable.	Run the fec command to configure this parameter.
Encrypt type	Enables or disables the encryption function of an EPON ONT line profile. Options: on and off.	Run the llid command to configure this parameter.
DBA Profile-id	Indicates the bound DBA profile of an EPON ONT line profile.
Traffic-table-index	Indicates the traffic profile in use of an EPON ONT line profile.
Traffic-table-name	Indicates the traffic profile name referenced by the EPON ONT line profile.	Run the llid command to configure this parameter.
TR069 IP index	Indicates the IP index used by the TR069 management channel. Range: 0 and 1.	Run the tr069-management(epon) command to configure this parameter.
Dba-threshold	Indicates the queue threshold of an EPON ONT line profile. Options: Q1, Q2, Q3, Q4, Q5, Q6, Q7, and Q8.	Run the dba-threshold command to configure this parameter.
Queue-set-index	Indicates the index of the DBA queue set.

More blog:

End-to-End GE Services Cannot Be Created on the OptiX OSN 6800

Comunication failure between the GSCC and EOW Gateway NE

Broadcast storm occured in S5300 when STP was ruuning

Tuesday, December 20, 2016

EPON ONT Line Profile Configuration about dba-threshold

Function

The dba-threshold command is used to configure the queue threshold in the DBA queue set of the ONT line profile. To configure the queue threshold in the DBA queue set of the ONT line profile, run this command.
The undo dba-threshold command is used to delete the queue threshold in a specified DBA queue set.

Format

dba-threshold queue-set-index { q1 value | q2 value | q3 value | q4 value | q5 value | q6 value | q7 value | q8 value } *
undo dba-threshold queue-set-index

Parameters

Parameter	Description	Value
queue-set-index	Indicates the index of a DBA queue set.	Numeral type. Range: 1-3.
q1 value	Indicates the threshold of DBA queue 1.	Numeral type. Range: 0-65535.
q2 value	Indicates the threshold of DBA queue 2.	Numeral type. Range: 0-65535.
q3 value	Indicates the threshold of DBA queue 3.	Numeral type. Range: 0-65535.
q4 value	Indicates the threshold of DBA queue 4.	Numeral type. Range: 0-65535.
q5 value	Indicates the threshold of DBA queue 5.	Numeral type. Range: 0-65535.
q6 value	Indicates the threshold of DBA queue 6.	Numeral type. Range: 0-65535.
q7 value	Indicates the threshold of DBA queue 7.	Numeral type. Range: 0-65535.
q8 value	Indicates the threshold of DBA queue 8.	Numeral type. Range: 0-65535.

Modes

EPON ONT line profile mode, GPBD, HG8245H

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the ont-lineprofile epon command to enter EPON ONT line profile configuration mode.
You can run the display ont-lineprofile epon command to query the configured parameters.
For a DBA queue set, configure the thresholds for the queues in the ascending order one by one, and delete the thresholds for the queues in the descending order one by one.

Example

To configure the thresholds to 128, 256, and 512 respectively for queues 1, 2, and 3 in DBA queue set 1 of ONT line profile 10, do as follows:

huawei(config-epon-lineprofile-10)#dba-threshold                                 
{ queue-set-index<U><1,3> }:1                                                   
{ q1<K>|q2<K>|q3<K>|q4<K>|q5<K>|q6<K>|q7<K>|q8<K> }:q1                          
{ value<U><0,65535> }:128                                                       
{ <cr>|q2<K>|q3<K>|q4<K>|q5<K>|q6<K>|q7<K>|q8<K> }:q2                           
{ value<U><0,65535> }:256                                                       
{ <cr>|q3<K>|q4<K>|q5<K>|q6<K>|q7<K>|q8<K> }:q3                                 
{ value<U><0,65535> }:512                                                       
{ <cr>|q4<K>|q5<K>|q6<K>|q7<K>|q8<K> }:                                         
                                                                                
  Command:                                                                      
          dba-threshold 1 q1 128 q2 256 q3 512

To delete the queue threshold in DBA queue set 1 of ONT line profile 10, do as follows:

huawei(config-epon-lineprofile-10)#undo dba-threshold                            
{ queue-set-index<U><1,3> }:1                                                   
                                                                                
  Command:                                                                      
          undo dba-threshold 1

System Response

The system does not display any message after the queue threshold is configured or deleted successfully in the DBA queue set of the ONT line profile.

More blog:

When the NMS Fail to Synchronize ONUs.

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

When Display Change of Service Ports and Service Failure in the MA5600T?

Friday, December 9, 2016

Common ONT Management about commit

Function

This command is used to submit the parameter configuration of the current service profile, line profile, alarm policy profile. During submission, the system checks whether the parameters of the service profile, line profile, or alarm policy profile are valid. If the parameters of the service profile or line profile are valid, the system uses the new parameter configuration as the system configuration. The parameter configuration in the current service profile, line profile, or alarm policy profile takes effect only after you run this command to submit the configuration successfully.

Format

commit

Parameters

None

Modes

VLAN service profile mode, ONT service profile mode, ONT line profile mode, ONT alarm policy profile mode, HG8245H, HG8245A

Level

Operator level

Usage Guidelines

Run the config command to enter the global config mode, and then run the vlan service-profile command to enter the VLAN service profile mode.
Run the config command to enter the global config mode, and then run the ont-lineprofile gpon command to enter the ONT line profile mode.
Run the config command to enter the global config mode, and then run the ont-srvprofile gpon command to enter the ONT service profile mode.
Run the config command to enter the global config mode, and then run the ont-alarm-policy command to enter ONT alarm policy profile mode.
For the EPBA board, the ONT service profile that is already bound to an ONT cannot be modified. In the case of such an ONT service profile, after you run the ont-srvprofile epon command, the system cannot enter the ONT service profile mode but displays a message indicating that the profile is already bound to an ONT.
For the EPBA board, the ONT line profile that is already bound to an ONT cannot be modified. In the case of such an ONT line profile, after you run the ont-lineprofile epon command, the system cannot enter the ONT line profile mode but displays a message indicating that the profile is already bound to an ONT.
The changed parameter of the service profile can take effect only after the commit command is executed.

Example

To submit the configuration of the current VLAN service profile, do as follows:

huawei(config-vlan-srvprof-1)#commit

System Response

The system does not display any message after the command is executed successfully.

More related:

When OSN 1500 R1PCXLN board fails to query optical power due to software BUG?

When the NMS Fail to Synchronize ONUs.

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

Monday, November 7, 2016

GPON ONT Service Profile Configuration(ont-port)

ont-port

Function

This command is used to set the port capability set in the ONT service profile, that is, the number of each type of ports on the ONT in the ONT service profile. The port capability set in the ONT service profile must be consistent with the actual capability set of the ONT. By default, the number for all types of ports in the ONT service profile is 0.

Format

ont-port { pots { pots-port | adaptive } | eth { eth-port | adaptive } | vdsl { vdsl-port | adaptive } | tdm tdm-port | tdm-type port-type | tdm-srvtype srv-type | moca moca-port | catv { catv-port | adaptive } }*

Parameters

Parameter	Description	Value
pots { pots-port \| adaptive }	Indicates the number of POTS ports on the ONT. When the value is adaptive, it indicates that the ONT automatically adapts the number of POTS ports.	Numeral type. Range: 0-32.
eth { eth-port \| adaptive }	Indicates the number of Ethernet ports on the ONT. When the value is adaptive, it indicates that the ONT automatically adapts the number of Ethernet ports.	Numeral type. Range: 0-8.
vdsl { vdsl-port \| adaptive }	Indicates the number of VDSL ports on the ONT. When this parameter is set to adaptive, the ONT automatically adapts the number of VDSL ports.	Numeral type. Range: 0-8.
tdm tdm-port	Indicates the number of TDM ports on the ONT.	Numeral type. Range: 0-8.
tdm-type port-type	Indicates the type of the TDM port on the ONT.	Enumerated type. Options: E1 and T1. Default value: E1.
tdm-srvtype srv-type	Indicates the service type of the TDM port. Currently, only TDMoGEM is supported. In the TDMoGEM mode, the TDM frames are directly encapsulated into GPON GEM frames and the TDM service is transmitted on the GPON network.	Enumerated type. It is TDMoGEM. Default value: TDMoGEM.
moca moca-port	Indicates the number of multimedia over coax alliance (MoCA) ports on the ONT. The MOCA port is a standard Ethernet port of north America. The function of this port is to transmit data and video signals concurrently over the coaxial cable and split the signals at the user terminal when the signals arrive at the user terminal.	Numeral type. Range: 0-8.
catv { catv-port \| adaptive }	Indicates the number of CATV ports on the ONT. When the value is adaptive, it indicates that the ONT automatically adapts the number of CATV ports.	Numeral type. Range: 0-8.

Modes

GPON ONT service profile mode, HG8245H, HG8245A

Level

Operator level

Usage Guidelines

Run the config command to enter the global config mode, and then run the ont-srvprofile gpon command to enter the GPON ONT service profile mode.
When you reduce the number of ports, the system displays a message prompting that the operation may delete ports that are not within the configuration range. In this case, you need to determine whether to reduce the number of ports based on site requirements.
If the adaptive parameter is applied, the system automatically adapts the number of ports based on the capability of the online ONT.
The number of each type of ports on the ONT must be consistent with the actual hardware capability of the ONT. Otherwise, the match state of the port is mismatch. You can run the display ont capability(gpon) command to query the ONT hardware capability, andd run the display ont info(gpon) command to query the ONT status.

Example

Assume that:

Number of POTS ports: adaptive
Number of VDSL ports: adaptive
Number of Ethernet ports: adaptive
Number of TDM ports: 2
Type of the TDM port: E1
Service type of the TDM port: TDMoGEM
Number of MOCA ports: 2
Number of CATV ports: 2

To configure such a port capability set in ONT service profile 10, do as follows:

huawei(config-gpon-srvprofile-10)#ont-port                               
{ catv<K>|eth<K>|moca<K>|pots<K>|tdm-srvtype<K>|tdm-type<K>|tdm<K>|vdsl<K> }:pots       
{ adaptive<K>|pots-port<U><0,32> }:adaptive 
{ <cr>|catv<K>|eth<K>|moca<K>|tdm-srvtype<K>|tdm-type<K>|tdm<K>|vdsl<K> }:vdsl 
{ adaptive<K>|vdsl-port<U><0,8> }:adaptive  
{ <cr>|catv<K>|eth<K>|moca<K>|tdm-srvtype<K>|tdm-type<K>|tdm<K> }:eth           
{ adaptive<K>|eth-port<U><0,8> }:adaptive 
{ <cr>|catv<K>|moca<K>|tdm-srvtype<K>|tdm-type<K>|tdm<K> }:tdm-srvtype          
{ srv-type<E><TDMoGEM> }:tdmoGEM                                                
{ <cr>|catv<K>|moca<K>|tdm-type<K>|tdm<K> }:tdm                                 
{ tdm-port<U><0,8> }:2                                                          
{ <cr>|catv<K>|moca<K>|tdm-type<K> }:tdm-type                                   
{ port-type<E><E1,T1> }:e1                                                      
{ <cr>|catv<K>|moca<K> }:moca                                                   
{ moca-port<U><0,8> }:2                                                         
{ <cr>|catv<K> }:catv
{ adaptive<K>|catv-port<U><0,8> }:2                                                         
                                                                                
  Command:                                                                      
          ont-port pots adaptive vdsl adaptive eth adaptive tdm-srvtype tdmoGEM 
tdm 2 tdm-type e1 moca 2 catv 2

System Response

The system does not display any message after the parameters of an ONT port capability set are configured successfully.

MORE BLOG:

What Is the Calculation Method for Load Balancing of the Upstream Aggregation Ports of the MA5680T?

When the NMS Failing to Synchronize ONUs?

How to Bootrom password for X7 switch

Monday, September 19, 2016

ONT Multicast Service Management----display simulation multicast ont

Function

This command is used to query information about ONT multicast simulation instances being performed.

Format

display simulation multicast ont [ frameid/slotid/portid ontid ]

Parameters

Parameter	Description	Value
frameid/slotid/portid	Indicates the shelf ID, slot ID, and port ID. Enter a slash (/) between the shelf, slot, and port IDs.	Please see Differences Between Shelves.
ontid	Indicates the ONT index. This parameter and frameid/slotid/portid collectively identify an ONT(like HG8245H, HG8545A).	Please see Differences Between Shelves.

Modes

Privilege mode

Level

Operator level

Usage Guidelines

If the subrack/slot/port ID and ONT ID are not specified, the system queries information about multicast simulation instances being performed for all ONTs in the system.

Example

To query information about multicast simulation instances of ONT 0 on port 0/2/0, do as follows:

huawei#display simulation multicast ont 0/2/0 0

  Command:
          display simulation multicast ont 0/2/0 0
  -----------------------------------------------------------------------------
  Instance(F/S/P/ONTID)   : 0/2/0/0
  ONT port                : ETH 1
  Multicast group IP      : 224.1.1.1
  Multicast source IP     : 1.2.3.4
  User IP                 : 10.0.0.1
  User MAC                : 00e0-fc01-0001
  VLAN ID                 : 100
  Priority                : 5
  User version            : IGMPv2
  Simulate status         : finished
  Simulate result         : success
  Data rate(kbps)         : 1500
  Simulate start time     : 2014-09-24 15:49:20+08:00 
  -----------------------------------------------------------------------------
  Total: 1

System Response

The system displays the queried result when the command runs successfully.

The following table describes the parameters in response to this command.

Parameter	Description
Instance(F/S/P/ONTID)	Indicates the shelf ID/slot ID/port ID and ONT index of the ONT multicast simulation instance.
ONT port	Indicates the ONT port ID.
Multicast group IP	Indicates the IP address of the multicast group.
Multicast source IP	Indicates the multicast source IP address.
User IP	Indicates the user IP address.
User MAC	Indicates the user MAC address.
VLAN ID	Indicates the user VLAN.
Priority	Indicates the priority.
User version	Indicates the multicast version.
Simulate status	Indicates the simulation state.
Simulate result	Indicates the simulation result.
Data rate	Indicates the data rate.
Simulate start time	Indicates the time when the simulation instance starts.

For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

What are the meanings of the short names of UA5000 boards

Description on the flow control of the NG SDH EFT data board

When Install SLQ4 board on slot 1 to slot 4 in OSN 3500?

Tuesday, September 13, 2016

GPON ONT Service Profile Configuration--mac-learning(pon profile)

Function

This command is used to enable or disable the MAC address learning function of an ONT. In the scenario (such as the private user scenario) where a large number of MAC addresses need to be learned, disable this function.

Format

mac-learning switch

Parameters

Parameter	Description	Value
mac-learning switch	Enables or disables the MAC address learning function. After the MAC address learning function is disabled, the ONT (such as HG8245H)does not learn the MAC address dynamically. In addition, the MAC addresses that were learned by the ONT are aged according to the aging period set through the mac-address timer command. Then, the data packets received by the ONT are broadcast in the VLAN. After the MAC address learning function is enabled, the ONT can learn the MAC addresses again.	Enumerated type. Options: disable and enable. Default value: enable.

Modes

ONT service profile config mode

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the ont-srvprofile gpon command to enter ONT service profile config mode.
After running this command, you need to run the commit command. Then, the configuration performed through this command can take effect.
You can run the display ont-srvprofile gpon command to query the status of the MAC address learning function of the ONT.

Example

To enable the MAC address learning function in ONT service profile 10, do as follows:

huawei(config-gpon-srvprofile-10)#mac-learning                              
{ switch<E><enable,disable> }:enable                                            
                                                                                
  Command:                                                                      
          mac-learning enable 

huawei(config-epon-srvprofile-10)#commit

To disable the MAC address learning function in ONT service profile 10, do as follows:

huawei(config-gpon-srvprofile-10)#mac-learning                              
{ switch<E><enable,disable> }:disable                                            
                                                                                
  Command:                                                                      
          mac-learning enable 

huawei(config-epon-srvprofile-10)#commit

System Response

The system does not display any message after the MAC address learning function of an ONT is enabled or disabled successfully.
For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

How to do when Occasional MA5616 Database Clearing?

What are the meanings of the short names of UA5000 boards

What Are the Configuration Specifications of the CBS and the PBS?

Friday, August 26, 2016

display ont gemport mapping

Function

The command is used to query the mapping relation between the GEM port and the ONT-side service. Only the GEM port with the created mapping relation can carry the service.

Format

display ont gemport mapping portid { ontid ontid | gemportid gemportid }

Parameters

Parameter	Description	Value
portid	Indicates the ID of the GPON port to which the ONT is connected.	Please see Differences Between Shelves.
ontid ontid	Queries all the mapping relations of the specified ONT(such as HG8245H).	Numeral type. Range: varies with the board type.
gemportid gemportid	Queries all the mapping relations of the specified GEM port.	Numeral type. Range: 128-3999.

Modes

GPON mode

Level

Operator level

Usage Guidelines

Run the config command to enter global config mode, and then run the interface gpon command to enter GPON mode.
Each ONT can be in only one mapping mode, which is configured in the bound ONT capability set profile.
The mapping modes supported by the ONT are decided by the capability of the ONT itself. The system supports the following seven mapping modes:
- In single-bridge mode:
  - Mapping based on VLAN
  - Mapping based on 802.1p priority
  - Mapping based on VLAN + 802.1p priority
- In multi-bridge mode:
  - Mapping based on port ID
  - Mapping based on port ID + VLAN
  - Mapping based on port ID + 802.1p priority
  - Mapping based on port ID + VLAN + 802.1p priority

Example

To query the service mapping relation for all GEM ports on gemportid 128 of port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#display ont gemport mapping
{ portid<U><0,7> }:0
{ gemportid<K>|ontid<K> }:gemportid
{ gemportid<U><128,3999> }:128

  Command:
          display ont gemport mapping 0 gemportid 128
   -----------------------------------------------------------------------------
   F/S/P  GEM     ONT ONT       ONT     Bundle Vlan Priority Traffic     Trans-
          port-ID ID  port-type port-ID ID     ID            table index parent
  ------------------------------------------------------------------------------
   0/3/0  128     1   ETH       1       -      22   -        -           enable
  ------------------------------------------------------------------------------
  Notes: Run the display traffic table ip command to query                      
         traffic table configuration                                            
  ------------------------------------------------------------------------------
   The number of mappings: 1

To query the service mapping relation for all GEM ports on ONT 0 of port 0/3/0, do as follows:

huawei(config-if-gpon-0/3)#display ont gemport mapping
{ portid<U><0,7> }:0
{ gemportid<K>|ontid<K> }:ontid
{ ontid<U><0,63> }:0

  Command:
          display ont gemport mapping 0 ontid 0
  ------------------------------------------------------------------------------
   F/S/P  GEM     ONT ONT       ONT     Bundle Vlan Priority Traffic     Trans-
          port-ID ID  port-type port-ID ID     ID            table index parent
  ------------------------------------------------------------------------------
   0/3/0  128     1   ETH       1       -      22   -        -           enable
  ------------------------------------------------------------------------------
  Notes: Run the display traffic table ip command to query                      
         traffic table configuration                                            
  ------------------------------------------------------------------------------
  The number of mappings: 1

System Response

The system displays the queried result when the command runs successfully.

The following table describes the parameters in response to this command.

Parameter	Description
F/S/P	Indicates the numbers of the shelf, slot, and port to which the ONT is connected.
GEM port-ID	Indicates the ID of the GEM port where the mapping relation is created.
ONT-ID	Indicates the ID of the ONT where the mapping relation is created.
ONT port-type	Indicates the ONT port type. The value is available when the mapping relation for the port is created. The port falls into six types: ETH, MOCA, IPHOST , E1 , ippath.and TDM-VCL.
ONT Port-ID	Indicates to map to the ID of the specified GEM port when the mapping mode includes the port mapping.
Bundle-ID	Indicates the bundle group ID of the ONT.
Vlan-ID	Indicates to map to the VLAN of the specified GEM port when the mapping mode includes the VLAN mapping.
Vlan-Priority	Indicates to map to the 802.1p priority of the specified GEM port when the mapping mode includes the priority mapping.
Traffic table index	Indicates the index of traffic table.
Transparent	Indicates the function of flow transparent.

For more information about the error message that the system displays against a command entered with incorrect syntax

MORE BLOG:

Thursday, December 29, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Wednesday, December 21, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Tuesday, December 20, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Friday, December 9, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Monday, November 7, 2016

ont-port

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Monday, September 19, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines

Example

System Response

Tuesday, September 13, 2016

Function

Format

Parameters

HG8245H)does not learn the MAC address dynamically. In addition, the MAC addresses that were learned by the ONT are aged according to the aging period set through the mac-address timer command. Then, the data packets received by the ONT are broadcast in the VLAN.

Modes

Level

Usage Guidelines

Example

System Response

Friday, August 26, 2016

Function

Format

Parameters

Modes

Level

Usage Guidelines