Common ONT Management about commit

Function

This command is used to submit the parameter configuration of the current service profile, line profile, alarm policy profile. During submission, the system checks whether the parameters of the service profile, line profile, or alarm policy profile are valid. If the parameters of the service profile or line profile are valid, the system uses the new parameter configuration as the system configuration. The parameter configuration in the current service profile, line profile, or alarm policy profile takes effect only after you run this command to submit the configuration successfully.

Format

commit

Parameters

None

Modes

VLAN service profile mode, ONT service profile mode, ONT line profile mode, ONT alarm policy profile mode, HG8245H, HG8245A

Level

Operator level

Usage Guidelines

• Run the config command to enter the global config mode, and then run the vlan service-profile command to enter the VLAN service profile mode.
• Run the config command to enter the global config mode, and then run the ont-lineprofile gpon command to enter the ONT line profile mode.
• Run the config command to enter the global config mode, and then run the ont-srvprofile gpon command to enter the ONT service profile mode.
• Run the config command to enter the global config mode, and then run the ont-alarm-policy command to enter ONT alarm policy profile mode.
• For the EPBA board, the ONT service profile that is already bound to an ONT cannot be modified. In the case of such an ONT service profile, after you run the ont-srvprofile epon command, the system cannot enter the ONT service profile mode but displays a message indicating that the profile is already bound to an ONT.
• For the EPBA board, the ONT line profile that is already bound to an ONT cannot be modified. In the case of such an ONT line profile, after you run the ont-lineprofile epon command, the system cannot enter the ONT line profile mode but displays a message indicating that the profile is already bound to an ONT.
• The changed parameter of the service profile can take effect only after the commit command is executed.

Example

To submit the configuration of the current VLAN service profile, do as follows:

huawei(config-vlan-srvprof-1)#commit

System Response

• The system does not display any message after the command is executed successfully.

More related:

When OSN 1500 R1PCXLN board fails to query optical power due to software BUG?

When the NMS Fail to Synchronize ONUs.

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T