Function
This command is used to query the current configuration information about the
specified EPON ONT line profile, including the configuration information about
the EPON ONT line profile which has not taken effect by running commit command. When you need to check whether
the related line parameters have been configured in the EPON ONT line profile,
run this command.
Usage Guidelines
- Run the config command to enter global config mode, and then run the ont-lineprofile epon command to enter EPON ONT line profile configuration mode.
- You can run the display ont-lineprofile epon command to query the information about the EPON ONT line profile in the system which has taken effect by running commit command.
Example
To query the current configuration information about EPON ONT line profile
10, do as follows:
huawei(config-epon-lineprofile-10)#display ont-lineprofile current
Command:
display ont-lineprofile current
---------------------------------------------------------------------
Profile-ID :10
Profile-name :line-profile_10
Access-type :EPON
---------------------------------------------------------------------
FEC switch :Disable
Encrypt type :off
DBA Profile-ID :9
Traffic-table-index :6
Traffic-table-name :ip-traffic-table_6
TR069 IP index :0
Dba-threshold :
---------------------------------------------------------------------
Queue-set-index Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
---------------------------------------------------------------------
1 - - - - - - - -
2 - - - - - - - -
3 - - - - - - - -
---------------------------------------------------------------------
Binding times :0
---------------------------------------------------------------------
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
command.
NOTE:
In the interface, "-" indicates that the item is not configured.Parameter Description Meaning Remark(Configuration Command) Profile-ID Indicates the ID of an EPON ONT line profile. It can be specified in the ont-lineprofile epon command when configuring an EPON ONT line profile. Profile-name Indicates the name of an EPON ONT line profile. Binding times Indicates the binding times of EPON ONT line profiles. There are two methods to bind an ONT to an EPON ONT line profile.- Run the ont add(epon) command to add an ONT offline, and bind the ONT to an EPON ONT line profile.
- Run the ont add(epon) command to confirm an automatically discovered ONT, and bind the ONT to an EPON ONT line profile.
Access-type Indicates the access type of an EPON ONT line profile. Option: EPON. - FEC switch Enables or disables the FEC function of an EPON ONT line profile. Options: Enable and Disable. Run the fec command to configure this parameter. Encrypt type Enables or disables the encryption function of an EPON ONT line profile. Options: on and off. Run the llid command to configure this parameter. DBA Profile-id Indicates the bound DBA profile of an EPON ONT line profile. Traffic-table-index Indicates the traffic profile in use of an EPON ONT line profile. Traffic-table-name Indicates the traffic profile name referenced by the EPON ONT line profile. Run the llid command to configure this parameter. TR069 IP index Indicates the IP index used by the TR069 management channel. Range: 0 and 1. Run the tr069-management(epon) command to configure this parameter. Dba-threshold Indicates the queue threshold of an EPON ONT line profile. Options: Q1, Q2, Q3, Q4, Q5, Q6, Q7, and Q8. Run the dba-threshold command to configure this parameter. Queue-set-index Indicates the index of the DBA queue set.
More blog:
No comments:
Post a Comment