display board autoload-forced status

Function

This command is used to query whether forced-autoload is enabled for boards.

Format

display board autoload-forced status

Parameters

None

Modes

Diagnose mode, Huawei MA5680T, Huawei MA5608T, Huawei MA5683T

Level

Super user level

Usage Guidelines

In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.

Example

To query whether forced-autoload is enabled for boards, do as follows:

huawei(diagnose)%%display board autoload-forced status
  -------------------------------------------------------------------------     
  FrameID    SlotID    AutoloadStatus                                           
  -------------------------------------------------------------------------     
  0          0         disable                                                  
  0          1         disable                                                  
  0          2         disable                                                  
  0          3         disable                                                  
  0          4         disable                                                  
  0          5         disable                                                  
  0          6         disable                                                  
  0          7         disable                                                  
  0          8         disable                                                  
  0          9         disable                                                  
  0          10        disable                                                  
  0          11        disable                                                  
  0          12        disable                                                  
  0          13        disable                                                  
  0          14        disable                                                  
  0          15        disable                                                  
  0          16        disable                                                  
  0          17        disable                                                  
  0          18        disable                                                  
  0          19        disable                                                  
  0          20        disable                                                  
  0          21        disable                                                  
  0          22        disable                                                  
  ------------------------------------------------------------------------- 

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to the command.

  Parameter	Description
  FrameID	Indicates the shelf ID.
  SlotID	Indicates the slot ID.
  AutoloadStatus	Indicates whether forced-autoload is enabled for boards.

How to Assemble an IMPI on the MA5620G?

What is the command lines that we can use on the OLT to detect PRTE board status

How to check service board detail information?