reset statistics ont-gem

Function

This command is used to clear the performance statistics of an ONT GPON encapsulation mode (GEM) port or the multicast packets. Before collecting the performance statistics of an ONT GEM port within a period of time, ensure that the original statistics of the ONT GEM port are reset to zero. The items that can be queried by running the display statistics ont-gem command. After the performance statistics are cleared, the system collects the performance statistics again.

NOTE:

The performance statistics of the ONT GEM port cannot be restored after being cleared. Confirm the action before using the command.

Format

In distributed mode and gigabit-capable passive optical network (GPON) mode:
reset statistics ont-gem portid gemportid
reset statistics ont-gem portid ontid multicast
In distributed mode and global config mode:
reset statistics ont-gem frameid/slotid portid ontid { gemportid gemport-id | multicast }
In profile mode and GPON mode:
reset statistics ont-gem portid ontid { gemindex gemindex | multicast }
In profile mode and global config mode:
reset statistics ont-gem frameid/slotid portid ontid { gemindex gemindex | multicast }

Parameters

Parameter	Description	Value
frameid/slotid	Indicates the shelf ID and slot ID of the GPON port for which the GEM port whose performance statistics are to be cleared. Enter a slash (/) between the shelf and slot IDs.	Please see Differences Between Shelves.
portid	Indicates the ID of the GPON port to which the GEM port whose performance statistics are to be cleared belongs.	Please see Differences Between Shelves.
ontid	Indicates the ID of the ONT port to which the GEM port whose performance statistics are to be cleared belongs.	Numeral type. Range: varies with the board type.
gemportid gemport-id	Indicates the ID of the GEM port whose performance statistics are to be cleared. This parameter is available only in distributed mode.	Numeral type. Range: 128-3999.
gemindex gemindex	Indicates the ID of the GEM whose performance statistics are to be cleared. This parameter is available only in profile mode.	Numeral type. Range: 0-1023.
multicast	Clears the performance statistics of multicast GEM port.	-

Modes

GPON mode, global config mode

Level

Operator level

Usage Guidelines

• Run the config command to enter global config mode, and then run the interface gpon command to enter GPON mode.
• To switch the xPON mode, run the diagnose command in privilege mode or global config mode to enter diagnose mode, and then run thexpon mode switch-to command. After the switching, reset the device for the mode to take effect.
• Run the display ont info command to query the state of ONT.
• The GEM port whose performance statistics are to be cleared by this command must exist. You can run the display ont info command to query the existed GEM port.

Example

In distributed mode and global config mode, to clear the performance statistics of GEM port 128 of ONT 0 connected to port 0/3/0, do as follows:

huawei(config)#reset statistics ont-gem                            
{ frameid/slotid<S><Length 3-15> }:0/3    
{ portid<U><0,15> }:0                                                            
{ ontid<U><0,127>  }:0                                                            
{ gemportid<K>|multicast<K> }:gemportid                                                      
{ gemport-id<U><128,3999> }:128                                                 
                                                                                
  Command:                                                                      
          reset statistics ont-gem 0/3 0 0 gemportid 128                            
  Clear statistics successfully  

In profile mode and global config mode, to clear the performance statistics of GEM port 128 of ONT 0 connected to port 0/3/0, do as follows:

huawei(config)#reset statistics ont-gem                            
{ frameid/slotid<S><Length 3-15> }:0/3
{ portid<U><0,15> }:0
{ ontid<U><0,127>  }:0
{ gemindex<K>|multicast<K>}:gemindex  
{ gemindex<U><0,1023> }:128
  
  Command:   
          reset statistics ont-gem 0/3 0 0 gemindex 128

System Response

• The system does not display any message after the statistics are cleared successfully in profile mode.
• The system displays the message "Clear statistics successfully" after the statistics are cleared successfully in distributed mode.
• For more information about the error message that the system displays against a command entered with incorrect syntax

MORE BLOG:

When Install SLQ4 board on slot 1 to slot 4 in OSN 3500?

Access Capacity of Slots of the OptiX OSN 1500 V1R2

How to Assemble an IMPI on the MA5620G?