Function
This terminal user apdinfo command is used
to modify the additional information about a user. When you need to add the
additional information about a user, such as the contact means, run this
command. After that, when the system has any problem, you can contact the user
after querying the additional information about the user.
Usage Guidelines
- The super user and administrator can modify the additional information about themselves and the user with lower level. The common user and operator can only modify their own additional information.
- The additional information about a user (it can be omitted) mainly refers to the contact of the user, for example, telephone number and address.
- The additional information must contain less than or equal to 30 characters. Run this command to modify the additional information about a user according to the command output.
- You can consecutively modify or clear the additional information about multiple users.
- When the user name to be modified does not exist, the system displays the message "Failure: This user does not exist".
Example
To modify the additional information about common user
huawei through an administrator account, do as follows:
huawei#terminal user apdinfo User Name(<=15 chars):huawei User's Appended Info(<=30 chars):support@huawei.com Information takes effect Repeat this operation? (y/n)[n]:
System Response
- The system displays the message "Information takes effect" after the additional information about a user is modified successfully.
- The following table describes the parameters in response to the
terminal user apdinfo command.
Parameter Description User Name Indicates the user name. User's appended info Indicates the additional information about a user. Repeat this operation? (y/n)[n] Indicates whether to repeat this operation, with "y" for yes and "n" for no. - For more information about the error message that the system displays against a command entered with incorrect syntax,
No comments:
Post a Comment