display xdsl reverse-powering mode

Function

This command is used to query the reverse power supply mode of the device.

Format

display xdsl reverse-powering mode

Parameters

None

Modes

Global config mode, Huawei MA5683T, Huawei MA5680T

Level

Operator level

Usage Guidelines

None

Example

To query the reverse power supply mode of the device, do as follows:

huawei(config)#display xdsl reverse-powering mode
  -----------------------------------------------------------------
  XDSL reverse-powering mode   : Currentport
  -----------------------------------------------------------------

System Response

• The following table describes the parameters in response to the command.

  Parameter	Description
  XDSL reverse-powering mode	Indicates the xDSL reverse power supply mode. It can be currentport or anyport. You can run the xdsl reverse-powering mode command to configure this parameter.

• For more information about the error message that the system displays against a command entered with incorrect syntax

MORE BLOG:

Warning of an ARP Entry Dually-Transmitting Failure

When Slave Main Control Board Unregistration on an ATN 950B

Description on the flow control of the NG SDH EFT data board