What's the board series-name?

Function

This command is used to configure the alias function of the serialized boards.
Before setting names for serialized boards, you must enable the alias function. After the function is enabled, you can set the alias for serialized boards when adding the boards offline. After the setting, the preset names are displayed as the default name of serialized boards.

Format

board series-name { enable | disable }

Parameters

Parameter	Description
enable	Enables the alias function. To set names for serialized boards when adding the boards offline, use this parameter.
disable	Disables the alias function. When you do not need to set names for serialized boards when adding the boards offline, use this parameter.

Modes

Global config mode,

Huawei MA5683T, Huawei MA5680T, Huawei MA5608T

Level

Administrator level

Usage Guidelines

None

Example

To enable the alias function of serialized boards, do as follows:

huawei(config)#board series-name
{ disable<K>|enable<K> }:enable

  Command:
          board series-name enable

System Response

• The system does not display any message after the alias function of serialized boards is enabled or disabled successfully.
• The system does not display any message after the alias function of serialized boards is reset successfully.
• For more information about the error message that the system displays against a command entered with incorrect syntax.

More blog:

How to Assemble an IMPI on the MA5620G?

What is the command lines that we can use on the OLT to detect PRTE board status

How to check service board detail information?