Function
This command is used to query the information about an EPON ONT service
profile. The EPON ONT service profile is used to configure the actual ONT
capability and the parameters related to the service, and provides the service
configuration channel for the ONT that is managed by using operation,
administration and maintenance (OAM). You can run this command to query the EPON
ONT service profile that meets the real service needs. After an ONT is added and
binds the EPON ONT service profile, the ONT will carry the corresponding service
according to the parameter configured in the EPON ONT service
profile.
Parameters
| Parameter | Description | Value |
|---|---|---|
| profile-id profile-id | Queries the detailed information oabout EPON ONT service profile by profile ID. | |
| profile-name profile-name | Queries the detailed information about EPON ONT service profile by profile name. | Character string type, a string of 1-32 characters. |
| all | Queries the basic information about all the ONT service profiles. including the ID, name and bound times of the ONT service profiles. | - |
Usage Guidelines
- Run the configcommand to enter the global config mode, and then run the interface epon command to enter EPON mode.
- In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.
- This command and the display ont-srvprofile
current(epon profile) command can both query the information about
the existed EPON ONT service profile, the differences are as follows:
- This command is used to query the information about the EPON ONT service profile that has taken effect by running the commit.
- The display ont-srvprofile current(epon profile) command is used to query the information about the EPON ONT service profile that has not taken effect by running the commit.
Example
To query the information about all the ONT service profiles, do as
follows:
huawei#display ont-srvprofile epon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:all
Command:
display ont-srvprofile epon all
-----------------------------------------------------------------------------
Profile-ID Profile-name Binding times
-----------------------------------------------------------------------------
1 srv-profile_1 0
10 srv-profile_10 0
-----------------------------------------------------------------------------
Total: 2
To query the detailed information about ONT service profile 10, do as
follows:huawei#display ont-srvprofile epon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:profile-id
{ profile-id<U><1,8192> }:10
Command:
display ont-srvprofile epon profile-id 10
-----------------------------------------------------------------------------
Profile-ID : 10
Profile-name: srv-profile_10
Access-type : EPON
-----------------------------------------------------------------------------
Port-type Port-number
-----------------------------------------------------------------------------
POTS 0
ETH adaptive
TDM 0
-----------------------------------------------------------------------------
TDM type : E1
Multicast fast leave switch : Unconcern
Ring check switch : Unconcern
-----------------------------------------------------------------------------
Port Port Up-traffic Down-traffic MAC-learn Class
Type ID CAR-ID CAR-ID count profile-ID
-----------------------------------------------------------------------------
ETH 1 Unconcern Unconcern Unlimited -
ETH 2 Unconcern Unconcern Unlimited -
ETH 3 Unconcern Unconcern Unlimited -
ETH 4 Unconcern Unconcern Unlimited -
ETH 5 Unconcern Unconcern Unlimited -
ETH 6 Unconcern Unconcern Unlimited -
ETH 7 Unconcern Unconcern Unlimited -
ETH 8 Unconcern Unconcern Unlimited -
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Port Port-ID Multicast-S-VLAN Multicast-C-VLAN Multicast Multicast
Type tag-strip group-num
-----------------------------------------------------------------------------
ETH 1 - - Tag Unlimited
ETH 2 - - Tag Unlimited
ETH 3 - - Tag Unlimited
ETH 4 - - Tag Unlimited
ETH 5 - - Tag Unlimited
ETH 6 - - Tag Unlimited
ETH 7 - - Tag Unlimited
ETH 8 - - Tag Unlimited
-----------------------------------------------------------------------------
Port-Type Port-ID Service-type Index S-VLAN C-VLAN
-----------------------------------------------------------------------------
ETH 1 - - - -
ETH 2 - - - -
ETH 3 - - - -
ETH 4 - - - -
ETH 5 - - - -
ETH 6 - - - -
ETH 7 - - - -
ETH 8 - - - -
-----------------------------------------------------------------------------
Binding times : 0
-----------------------------------------------------------------------------
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
command.
NOTE:
In the interface, "-" indicates that the item is not supported.Parameter Description Meaning Remark(Configuration Command) Profile-ID Indicates the ID of an ONT service profile. It can be spicified in the ont-srvprofile epon command when configuring an EPON ONT service profile. Profile-name Indicates the name of an ONT service profile. Binding times Indicates the bound times of the ONT service profile. There are two methods to bind an ONT to an EPON ONT service profile.- Run the ont add(epon) command to add an ONT offline, and bind the ONT to an EPON ONT service profile.
- Run the ont confirm(epon) command to confirm an automatically discovered ONT, and bind the ONT to an EPON ONT service profile.
Total Indicates the total number of ONT service profiles. - Access-type Indicates the access type of an EPON ONT service profile. Option: EPON. - Port-type Indicates the port type. Options: POTS, ETH, and TDM. Run the ont-port(epon profile) command to configure this parameter. Port-number Indicates the number of ports. TDM type Indicates the TDM port type. Multicast fast leave switch Indicates the multicast fast leave function. Run the multicast fast-leave command to configure this parameter. Ring check switch Indicates the status of the ring network detection. Run the ring check(epon profile) command to configure this parameter. Port-Type /Port Type Indicates the port type. - Port ID/Port-ID Indicates the port ID. - Up-traffic CAR-ID Indicates the ID of the upstream traffic profile. Run the port eth(epon profile) command to configure this parameter. Down-traffic CAR-ID Indicates the ID of the downstream traffic profile. MAC-learn count Indicates the number of learned MAC addresses. Class profile-ID Indicates the ID of the traffic classification profile. Run the port classification command to configure this parameter. Multicast-S-VLAN Indicates the service VLAN ID used in the multicast service. Run the port eth(epon profile) command to configure this parameter. Multicast-C-VLAN Indicates the customer VLAN ID used in the multicast service. Multicast tag-strip Indicates the processing mode of the multicast tag. Multicast group-num Indicates the number of multicast programs. Service-type Indicates the service type. Run the port vlan(epon profile) command to configure this parameter. Index Indicates theVLAN index. S-VLAN Indicates the service VLAN. C-VLAN Indicates the customer VLAN. - For more information about the error message that the system displays against a command entered with incorrect syntax.
MORE BLOG:
No comments:
Post a Comment