GPON Global Parameter Configuration(display gpon global-config)

display gpon global-config

Function

This command is used to query the GPON global configuration information.

Format

display gpon global-config

Parameters

None

Modes

privilege mode

Level

Operator level

Usage Guidelines

None

Example

To query the GPON global configuration information in profile mode, do as follows:

huawei#display gpon global-config
  ------------------------------------------------------------------------
  GPON base GEM port                              : 128
  GPON DBA bandwidth type                         : GPON
  GPON DBA bandwidth assignment mode              : min-loop-delay
  GPON multicast GEM port                         : 4095
  XG-PON multicast GEM port                       : 65532
  GPON ONT password renew interval(min)           : -
  GPON T-CONT auto-combine switch                 : disable
  GPON T-CONT auto-create switch                  : disable
  GPON interoperability standard                  : ITU-T
  GPON interoperability multicast authentication  : ONT control
  GPON interoperability T-CONT PQ priority reverse: disable
  GPON interoperability ONT WAN config mode       : set-after-create
  GPON ONT home gateway config method             : OMCI
  ------------------------------------------------------------------------

To query the GPON global configuration information about the SCUN control board in distributed mode, do as follows:

huawei#display gpon global-config
  ------------------------------------------------------------------------
  GPON base GEM port                              : 128
  GPON DBA bandwidth type                         : GPON
  GPON DBA bandwidth assignment mode              : min-loop-delay
  GPON multicast GEM port                         : 4095
  XG-PON multicast GEM port                       : 65532
  GPON ONT password renew interval(min)           : -
  GPON T-CONT auto-combine switch                 : disable
  GPON T-CONT auto-create switch                  : disable
  GPON interoperability standard                  : ITU-T
  GPON interoperability multicast authentication  : ONT control
  GPON interoperability T-CONT PQ priority reverse: disable
  GPON interoperability ONT WAN config mode       : set-after-create
  GPON ONT home gateway config method             : OMCI
  ------------------------------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  	Meaning	Remark (Configuration Command)
  GPON base GEM port	Indicates the start GEM port of GPON ports.	Run the gpon base-gemport command to configure this parameter.
  GPON DBA bandwidth type	Indicates the GPON dynamic bandwidth allocation (DBA) bandwidth type. Options: GPON and Ethernet.	Run the gpon dba bandwidth-type command to configure this parameter.
  GPON DBA bandwidth assignment mode	Indicates the GPON DBA bandwidth assignment mode. Options: min-loop-delay, max-bandwidth-usage and manual.	Run the gpon dba bandwidth-assignment-mode command to configure this parameter.
  GPON multicast GEM port	Indicates the multicast GEM port in the system.	Run the gpon multi-portid command to configure this parameter.
  XG-PON multicast GEM port	Indicates the XG-PON multicast GEM port in the system.	Run the gpon multi-portid command to configure this parameter.
  GPON ONT password renew interval(min)	Indicates the interval for renewing the ONT key of the GPON port.	Run the gpon ont-password-renew command to configure this parameter.
  GPON T-CONT auto-combine switch	Indicates the status of the GPON T-CONT auto-combine function. Options: enable and disable.	Run the gpon tcont auto-combine command to configure this parameter.
  GPON T-CONT auto-create switch	Indicates the function of automatically generating GPON T-CONTs. Options: enable and disable.	Run the gpon tcont auto-create command to configure this parameter.
  GPON interoperability standard	Indicates the GPON ONT interoperability mode. Options: ITU-T, ITU-T G.984, ITU-T G.988, CTC, Eric V1 and Eric V2.	Run the xpon ont-interoperability-mode gpon command to configure this parameter.
  GPON interoperability multicast authentication	Indicates the control mode of the GPON ONT multicast. Options: ONT control and OLT control.
  GPON interoperability T-CONT PQ priority reverse	Indicates the status of the GPON T-CONT PQ priority reverse function. Options: enable and disable.
  GPON interoperability ONT WAN config mode	Indicates the configuration mode of the ONT WAN port. Options: set-after-create and set-by-create.	Run the xpon ont-interoperability-mode gpon command to configure this parameter.
  GPON ONT home gateway config method	Indicates the configuration mode of the GPON ONT home gateway. Options: default and OMCI.	Run the gpon ont home-gateway command to configure this parameter.

MORE BLOG:

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

How to enable the operation of log forwarding server on the U2000?

When Display Change of Service Ports and Service Failure in the MA5600T?