GPON Access Port Management(reset gpon statistics ethernet)

reset gpon statistics ethernet

Function

This command is used to clear the performance statistics of the Ethernet frames of a specified GPON port. Before collecting the performance statistics of the Ethernet frames within a period of time, ensure that the original statistics of the GPON port are reset to zero. The items that can be queried by running the display gpon statistics ethernet command. After the performance statistics are cleared, the system collects the performance statistics again.

NOTE:

The performance statistics of the ethernet frames of the specified GPON port cannot be restored after being cleared. Confirm the action before using the command.

Format

reset gpon statistics ethernet frameid/slotid portid

Parameters

Parameter	Description	Value
frameid/slotid	Indicates the shelf ID and slot ID of the GPON port whose performance statistics of Ethernet frames are to be cleared. Enter "/" between the shelf and slot IDs.	Please see Differences Between Shelves.
portid	Indicates the number of the GPON port whose performance statistics of Ethernet frames are to be cleared.	Please see Differences Between Shelves.

Modes

Global config mode, GPBD, MA5683T

Level

Operator level

Usage Guidelines

• The function of the reset gpon statistics ethernet command and reset statistics port ethernet(gpon) is the same.
• This command is used to clear the performance statistics of the Ethernet frames of a specified GPON port. You can run the reset gpon statistics gem command to clear the performance statistics of the GPON encapsulation mode(GEM) frames of a specified GPON port.

Example

To clear the Ethernet frame statistics for port 0/3/0, do as follows:

huawei(config)#reset gpon statistics ethernet                                   
{ frameid/slotid<S><Length 3-15> }:0/3    
{ portid<U><0,15> }:0                                                            
                                                                                
  Command:                                                                      
          reset gpon statistics ethernet 0/3 0

System Response

• The system does not display any message after the command is executed successfully. 

MORE:

When the NMS Fail to Synchronize ONUs.

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

When Display Change of Service Ports and Service Failure in the MA5600T?