GPON Access Port Management(reset gpon statistics gem)

reset gpon statistics gem

Function

This command is used to clear the performance statistics of the GPON encapsulation mode(GEM) frames of a specified GPON port. Before collecting the performance statistics of the GEM frames within a period of time, ensure that the original statistics of the GPON port are reset to zero. The items that can be queried by running the display statistics ont-gem command. After the performance statistics are cleared, the system collects the performance statistics again.

NOTE:

The performance statistics of the GEM frames of the specified GPON port cannot be restored after being cleared. Confirm the action before using the command.

Format

reset gpon statistics gem frameid/slotid portid

Parameters

Parameter	Description	Value
frameid/slotid	Indicates the shelf ID and slot ID of the GPON port whose performance statistics of GEM frames are to be cleared. Enter "/" between the shelf and slot IDs.	Please see Differences Between Shelves.
portid	Indicates the number of the GPON port whose performance statistics of GEM frames are to be cleared.	Please see Differences Between Shelves.

Modes

Global config mode, MA5683T, GPBD

Level

Operator level

Usage Guidelines

• The function of the reset gpon statistics gem command and reset statistics port gem(gpon) is the same.
• This command is used to clear the performance statistics of the GPON encapsulation mode(GEM) frames of a specified GPON port. You can run the reset gpon statistics ethernetcommand to clear the performance statistics of the Ethernet frames of a specified GPON port.

Example

To clear the GEM frame statistics for port 0/3/0, do as follows:

huawei(config)#reset gpon statistics gem                                             
{ frameid/slotid<S><Length 3-15> }:0/3                                                 
{ portid<U><0,15> }:0                                                            
                                                                                
  Command:                                                                      
          reset gpon statistics gem 0/3 0  

System Response

• The system does not display any message after the command is executed successfully. 

MORE:

What Is the Calculation Method for Load Balancing of the Upstream Aggregation Ports of the MA5680T?

What’s the Failure of I-Type PDU Backplane on MA5600T due to Overcurrent

How to Assemble an IMPI on the MA5620G?