GPON Access Port Management(clear gpon statistics ethernet)

clear gpon statistics ethernet

Function

This command is used to clear the Ethernet frames of a specified GPON port. The previous statistics are cleared by running this command and will be re-collected.

Format

clear gpon statistics ethernet frameid/slotid portid

Parameters

Parameter	Description	Value
frameid/slotid	Indicates the shelf ID and slot ID. Enter "/" between the shelf and slot IDs.	Please see Differences Between Shelves.
portid	Indicates the number of the GPON port whose data is to be cleared.	Please see Differences Between Shelves.

Modes

Global config mode, GPBD, GPFD

Level

Operator level

Usage Guidelines

None

Example

To clear the Ethernet frame statistics of port 0/3/0, do as follows:

huawei(config)#clear gpon statistics ethernet                                   
{ frameid/slotid<S><Length 3-15> }:0/3    
{ portid<U><0,15> }:0                                                            
                                                                                
  Command:                                                                      
          clear gpon statistics ethernet 0/3 0

System Response

• The system does not display any message after the command is executed successfully.

MORE BLOG:

How to enable the operation of log forwarding server on the U2000?

When Display Change of Service Ports and Service Failure in the MA5600T?

What Is the Calculation Method for Load Balancing of the Upstream Aggregation Ports of the MA5680T?