GPON Global Parameter Configuration(display gpon ont-pq-map-policy)

display gpon ont-pq-map-policy

Function

This command is used to query the priority queue mapping policy of GPON ONTs when the QoS mode is set to PQ.

Format

display gpon ont-pq-map-policy

Parameters

None

Modes

Diagnose mode, GPBD

Level

Operator level

Usage Guidelines

• Run the config command to enter the global config mode, and then run the diagnose command to enter the diagnose mode.
• This command is used to query the priority queue mapping policy of GPON ONTs when the QoS mode is set to PQ.

Example

To query the priority queue mapping policy of GPON ONTs when the QoS mode is set to PQ, do as follows:

huawei(diagnose)%%display gpon ont-pq-map-policy 
 -------------------------------------------------------------
 GPON ONT priority queue mapping policy under PQ mode: COS-map
 -------------------------------------------------------------

System Response

• The system displays the priority queue mapping policy.
• The following table describes the parameters in response to this command.
  

  Parameter	Description
  GPON ONT priority queue mapping policy under PQ mode	Indicates the priority queue mapping policy of GPON ONTs when the QoS mode is set to PQ. Valid values: cos-map and GEM-map.

MORE BLOG:

What Is the Calculation Method for Load Balancing of the Upstream Aggregation Ports of the MA5680T?

When the NMS Failing to Synchronize ONUs?

How to Bootrom password for X7 switch