GPON ONT Service Profile Configuration(native-vlan(gpon profile))

native-vlan(gpon profile)

Function

This command is used to configure whether the ONT concerns the Native VLAN item in the ONT service profile. If the ONT is configured to concern the Native VLAN item, the ONT includes the Native VLAN item to the user-side untagged packets. If the ONT is configured to not concern the Native VLAN item, the ONT does not include the Native VLAN item to the user-side untagged packets. By default, the ONT concerns the Native VLAN item.

Format

native-vlan option-value, MA5683T, MA5680T

Parameters

Parameter	Description	Value
option-value	Configures the Native VLAN item in the ONT service profile to concern or unconcern.	Enumerated type. Options: concern and unconcern.

Modes

GPON ONT service profile mode

Level

Operator level

Usage Guidelines

• Run the config command to enter the global config mode, and then run the ont-srvprofile gpon command to enter the ONT service profile mode.
• You can run the ont port native-vlan(gpon) command to configure the Native VLAN item of the ONT port only when the Native VLAN item is set to concern. You cannot change the Native VLAN item to unconcern when the Native VLAN item of the ONT port is configured to a non-default value already . To query the VLAN configuration of the ONT port, run the display ont port attribute command.
• You can run the port q-in-q command to configure the QinQ attribute of the Ethernet port on the ONT only when the Native VLAN item is set to concern. You cannot change the Native VLAN item to unconcern when the QinQ attribute of the Ethernet port on the ONT is enabled. To query the information about the QinQ attribute of the Ethernet port on the ONT, run the display ont-srvprofile gpon command.
• You can run the ont port vlan(distributing-mode) command to configure the policy of processing untagged packets on the ONT port only when the Native VLAN item is set to unconcern. You cannot change the Native VLAN item to concern when the policy of processing untagged packets on the ONT port is already configured. To query the policy of processing untagged packets on the ONT port, run the display ont port vlan (distributing-mode) command.
• You can run the display ont-srvprofile gpon command to query the Native VLAN item in the ONT service profile.

Example

To configure the Native VLAN item in ONT service profile 10 to unconcern, do as follows:

huawei(config-gpon-srvprofile-10)#native-vlan                                 
{ option-value<E><concern, unconcern> }:unconcern                                            
                                                                                
  Command:                                                                      
          native-vlan unconcern

System Response

• The system does not display any message after the Native VLAN item of ONT in the ONT service profile is configured successfully.

MORE BLOG:

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

How to enable the operation of log forwarding server on the U2000?

When Display Change of Service Ports and Service Failure in the MA5600T?