EPON ONT Line Profile Configuration-----display ont-lineprofile epon bound-info

Function

This command is used to query the bound information about an EPON ONT service profile, including the position of EPON port the ONT which binds the profile related to, and the ONT ID.

Format

display ont-lineprofile epon bound-info { profile-id profile-id | profile-name profile-name }

Parameters

Parameter	Description	Value
profile-id profile-id	Queries the bound information about the EPON ONT service profile of the specified ID.	Numeral type. Range: SCUL/SCUN/SCUK/SCUB/SCUF: 1-8192 SCUH: 1-8192 MCUD/MCUD1: 1-1024
profile-name profile-name	Queries the bound information about the EPON ONT service profile of the specified name.	Character string type, a string of 1-32 characters.

Modes

Privilege mode, diagnose mode

Level

Operator level

Usage Guidelines

• In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.
• Run the display xpon global-config command to query the status of the bound xPON profile modification function. The EPON ONT line profile which has been bound by ONT cannot be modified when the bound xPON profile modification function is disabled. If you need to modify the bound profile, do as follows:
  • Run the xpon modify-bound-profile command to enable the bound xPON profile modification function of the bound EPON ONT line profile.
  • Run the ont modify(epon) command or the ont delete command to unbind the ONT and EPON ONT line profile.

Example

To query the bound information of EPON ONT line profile 10, do as follows:

huawei#display ont-lineprofile epon bound-info
{ profile-id<K>|profile-name<K> }:profile-id
{ profile-id<U><1,8192> }:10
                                                                                
  Command:                                                                      
          display ont-lineprofile epon bound-info profile-id 10                
  ---------------------------------------------------------------------         
  F/S/P       ONT List
  ---------------------------------------------------------------------         
  0/ 1/0      0,2
  0/ 2/0      3-5
  0/ 4/0      5-6,8
  ---------------------------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to the command.

  Parameter	Description
  F/S/P	Indicates the shelf ID, slot ID, and port ID of the ports the ONTs which bind EPON ONT line profile related to.
  ONT List	Indicates the list of the ONTs which bind EPON ONT line profile.

• For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

How to Replace the Satellite Card of the SRCU Board in the BITSV3

What’s the Failure of I-Type PDU Backplane on MA5600T due to Overcurrent

How to do when Occasional MA5616 Database Clearing?