Parameters
| Parameter | Description | Value |
|---|---|---|
| frameid/slotid | Indicates the subrack ID and slot ID. Enter a slash (/) between the subrack and slot IDs. | Please see Differences Between Shelves. |
Usage Guidelines
Run the config command to enter
global config mode, and then run the diagnose command to enter diagnose
mode.
Example
To query the working mode of the XG-PON board in slot 1, do as follows:
huawei(diagnose)%%display gpon board workmode 0/1 Board work mode: XG-PON
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
display gpon board workmode command.
Parameter Description Board work mode Indicates the board working mode, which includes GPON and XG-PON.- When the working mode is GPON, the board can be connected to GPON ONUs.
- When the working mode is XG-PON, the board can be connected to XG-PON ONUs.
- For more information about the error message that the system displays against a command entered with incorrect syntax.
MORE BLOG:
No comments:
Post a Comment