Function
This command is used to query the MG interface attribute profile on the
optical network terminal (ONT). You can apply one profile to one MG interface or
multiple MG interfaces at a time.
Format
display ont-mg-attribute-profile {
profile-id profile-id | profile-name
profile-name-value } *
display ont-mg-attribute-profile all
display ont-mg-attribute-profile all
Parameters
| Parameter | Description | Value |
|---|---|---|
| all | Indicates all MG interface attribute profiles. | - |
| profile-id profile-id | Indicates the profile ID. It uniquely identifies a profile. | Numeral type. Range: 1-64. |
| profile-name profile-name-value | Indicates the profile name. It uniquely identifies a profile. | Character string type, a string of 1-32 characters. |
Usage Guidelines
You can run the ont-mg-attribute-profile
add command to add an MG interface attribute
profile.
Example
To query the MG interface attribute profile named pots-profile-area1 on the
ONT, do as follows:
huawei(config)#display ont-mg-attribute-profile
{ all<K>|profile-id<K>|profile-name<K> }:profile-name
{ profile-name-value<S><Length 1-32> }:pots-profile-area1
{ <cr>|profile-id<K> }:
Command:
display ont-mg-attribute-profile profile-name pots-profile-area1
------------------------------------------------------------------------------
Profile ID : 4
Profile name : pots-profile-area1
Faxmode : T.38
Negotiate mode : negotiate
Order1
Codec1 : G711A
Packet period1 : 20 ms
Silence1 : off
Order2
Codec2 : G711U
Packet period2 : 20 ms
Silence2 : off
Order3
Codec3 : G729
Packet period3 : 20 ms
Silence3 : off
Order4
Codec4 : G722
Packet period4 : 20 ms
Silence4 : off
Oob dtmf : outband
Announcement type : Fast busy
Fixed jitter buffer : 60 ms
Dynamic jitter buffer : 6 ms
Max jitter buffer : 135 ms
Min jitter buffer : 2 ms
Echo flag : on
Pstn protocol variant : tp
Piggyback event : disable
Tone event : disable
Dtmf event : disable
Cas event : disable
Flash upper : ONT own default value
Flash lower : ONT own default value
Silence : base-on-codec
------------------------------------------------------------------------------
To query all MG interface attribute profiles on the ONT, do as follows:huawei(config)#display ont-mg-attribute-profile
{ all<K>|profile-id<K>|profile-name<K> }:all
Command:
display ont-mg-attribute-profile all
------------------------------------------------------------------------------
Profile-id Profile-name
------------------------------------------------------------------------------
1 mg-attribute-profile_1
2 mg-attribute-profile_2
3 mg-attribute-profile_3
4 pots-profile-area1
------------------------------------------------------------------------------
Total: 4
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
display ont-mg-attribute-profile profile-name
pots-profile-area1 command.
Parameter Description Profile ID Indicates the profile ID. It uniquely identifies a profile. Profile name Indicates the profile name. It uniquely identifies a profile. Faxmode Indicates the fax mode. Negotiate mode Indicates the fax/modem negotiation mode. Codec1 Indicates the codec type in the codec mode with priority 1. Packet period1 Indicates the packetization duration in the codec mode with priority 1. Silence1 Indicates the silence compression configuration in the codec mode with priority 1. Codec2 Indicates the codec type in the codec mode with priority 2. Packet period2 Indicates the packetization duration in the codec mode with priority 2. Silence2 Indicates the silence compression configuration in the codec mode with priority 2. Codec3 Indicates the codec type in the codec mode with priority 3. Packet period3 Indicates the packetization duration in the codec mode with priority 3. Silence3 Indicates the silence compression configuration in the codec mode with priority 3. Codec4 Indicates the codec type in the codec mode with priority 4. Packet period4 Indicates the packetization duration in the codec mode with priority 4. Silence4 Indicates the silence compression configuration in the codec mode with priority 4. Oob dtmf Indicates the dual tone multiple frequency (DTMF) transmission mode. Announcement type Indicates the type of the signal tone that is heard when offhook times out on the POTS port. Fixed jitter buffer Indicates the initial value of the static jitter buffer. Dynamic jitter buffer Indicates the initial value of the dynamic jitter buffer. Min jitter buffer Indicate the minimum value of the jitter buffer. Max jitter buffer Indicate the maximum value of the jitter buffer. Echo flag Indicates whether to enable echo cancellation. Pstn protocol variant Indicates a geographical location variable, which is used to identify a time tone and adjust time in the case of the caller identification display (CID) service. Piggyback event Indicates whether to send piggyback events using RTP packets. Tone event Indicates whether to process the Tone events in RTP packets defined in RFC4733. Dtmf event Indicates whether to process the DTMF events in RTP packets defined in RFC4733. Cas event Indicates whether to process the CAS events in RTP packets defined in RFC4733. Flash upper Indicates the upper threshold of hooking flash. Flash lower Indicates the lower threshold of hooking flash. Silence Indicates whether to enable silence compression for interfaces. - The following table describes the parameters in response to the
display ont-mg-attribute-profile all command.
Parameter Description Profile-id Indicates the profile ID. It uniquely identifies a profile. Profile-name Indicates the profile name. It uniquely identifies a profile. - For more information about the error message that the system displays against a command entered with incorrect syntax
MORE BLOG:
No comments:
Post a Comment