SHDSL Alarm Profile Configuration----shdsl alarm-profile delete

Function

This command is used to delete an SHDSL alarm profile. When an SHDSL alarm profile is no longer useful, you can run the command to delete it. After the SHDSL alarm profile is deleted, the configuration data is deleted and cannot be restored.

Format

shdsl alarm-profile delete profile-index

Parameters

Parameter	Description	Value
profile-index	Indicates the ID of an SHDSL alarm profile.	Numeral type. Range: 2-99.

Modes

Global config mode, SHDSL mode, OSN 3500, OSN 7500

Level

Operator level

Usage Guidelines

• Run the config command to enter global config mode, and then run the interface shl command to enter SHDSL mode.
• When deleting an SHDSL alarm profile, pay attention to the following points:
  • The default profile (profile 1) cannot be deleted.
  • The profile in use cannot be deleted.

Example

To delete SHDSL alarm profile 4, do as follows:

huawei(config)#shdsl alarm-profile delete                           
{ profile-index<U><2,99> }:4                                                     
                                                                                
  Command:                                                                      
          shdsl alarm-profile delete 4  

System Response

• The system does not display any message after the SHDSL alarm profile is deleted successfully.
• For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

What are the meanings of the short names of UA5000 boards

What Are the Configuration Specifications of the CBS and the PBS?

During the Rerouting in the ASON Network, the Protection Switching Time May Exceed the Specification Value