Parameters
| Parameter | Description | Value |
|---|---|---|
| info | Queries the IDs and names of all VDSL2 line templates. | - |
| template-index | Indicates the ID of a VDSL2 line template. When querying a VDSL2 line template, you can specify a template number or not. If you specify it, the system displays the details of the specified template. If you do not specify it, the system displays the information about all templates in the system. | Numeral type. Range: For SCUN/SCUK board: 1-2048, for other control boards: 1-770. |
Usage Guidelines
- Run the config command to enter global config mode, and then run the interface vdsl command to enter VDSL mode.
- Each VDSL2 line supports up to 2 channels.
Example
To query the information about all VDSL2 line templates, do as follows:
huawei#display vdsl line-template
{ <cr>|info<K>|template-index<L><1,770> }:
Command:
display vdsl line-template
------------------------------------------------------------------------------
Template Template Line Profile Channel1 Channel2 Ref
Index Name Index Profile Index Profile Index Times
------------------------------------------------------------------------------
1 DEFVAL 1 1 - 48
2 VDSL LINE TEMPLA 1 1 - 0
TE 2
3 VDSL LINE TEMPLA 1 1 - 0
TE 3
4 VDSL LINE TEMPLA 1 1 - 0
TE 4
------------------------------------------------------------------------------
Total: 4
To query the details of VDSL2 line template 2, do as follows:huawei#display vdsl line-template
{ <cr>|info<K>|template-index<L><1,770> }:2
Command:
display vdsl line-template 2
------------------------------------------------------------------------------
Template index: 2 Name: VDSL LINE TEMPLATE 2
Line profile index : 1
Channel1 profile index : 2
Channel1 rate adaptation ratio downstream : 100
Channel1 rate adaptation ratio upstream : 100
------------------------------------------------------------------------------
To query the IDs and names of all VDSL2 line templates in the system, do as
follows:huawei#display vdsl line-template
{ <cr>|info<K>|template-index<L><1,770> }:info
Command:
display vdsl line-template info
------------------------------------------------------------------------
Template Template
Index Name
------------------------------------------------------------------------
1 DEFVAL
------------------------------------------------------------------------
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
display vdsl line-template command.
Parameter Description Line profile index Indicates the number of the VDSL2 line profile bound to the VDSL2 line template. Each VDSL2 line template must be bound with a VDSL2 line profile. Channel1 profile index Indicates the VDSL2 channel profile bound to channel 1. Channel2 profile index Indicates the VDSL2 channel profile bound to channel 2. Ref Times Indicates the count that a VDSL2 line template is referenced by ports. - The following table describes the parameters in response to the
display vdsl line-template 2 command.
Parameter Description Line profile index Indicates the number of the VDSL2 line profile bound to the VDSL2 line template. Each VDSL2 line template must be bound with a VDSL2 line profile. Channel1 profile index Indicates the VDSL2 channel profile bound to channel 1. Channel2 profile index Indicates the VDSL2 channel profile bound to channel 2. Channel1/Channel2 rate adaptation ratio downstream Indicates the self-adaptation carry ratio of channel 1 downstream rate to channel 2 downstream rate.
When the line rate self-adaptation mode is dynamic and the line is in good condition, if the line current activation rate exceeds the set target rate, the redundant rate can be carried in different channels. Each channel can carry part or all of the redundant rate. The ratio determines how much rate each channel shall carry.Channel1/Channel2 rate adaptation ratio upstream Indicates the self-adaptation carry ratio of channel 1 upstream rate to channel 2 upstream rate.
When the line rate self-adaptation mode is dynamic and the line is in good condition, if the line current activation rate exceeds the set target rate, the redundant rate can be carried in different channels. Each channel can carry part of or all redundant rates. The ratio determines how much rate each channel shall carry. - The following table describes the parameters in response to the
display vdsl line-template info command.
Parameter Description Template Index Indicates the index of the VDSL2 line profile bound to the VDSL2 line template. Each VDSL2 line template must be bound with a VDSL2 line profile. Template Name Indicates the name of the VDSL2 line profile bound to the VDSL2 line template. Each VDSL2 line template must be bound with a VDSL2 line profile. - For more information about the error message that the system displays against a command entered with incorrect syntax
MORE BLOG:
No comments:
Post a Comment