IPDR Configuration(ipdr parameter ack-timeout)

ipdr parameter ack-timeout

Function

The ipdr parameter ack-timeout command is used to set acknowledged records timeout value for an Internet Protocol Detail Record (IPDR).
The undo ipdr parameter ack-timeout command is used to reset the acknowledged records timeout value to the default value 60s.

Format

ipdr parameter ack-timeout time
undo ipdr parameter ack-timeout

Parameters

Parameter	Description	Value
time	Indicates the interval at which the acknowledged records timeout is checked.	Numeral type. Range: 5-60. Unit: second. Default value: 60. NOTE: The shorter the acknowledged records timeout interval is, more packets between the CMTS device and IPDR collector need to be acknowledged, which heavies the load on the IPDR collector.

Modes

Global config mode,MA5683T,MA5680T,MA5608T

Level

Administrator level

Usage Guidelines

The interval at which the acknowledged records timeout is checked can be modified only when all sessions are in the deactivated state.

Example

To set the acknowledged records timeout value to 50s, do as follows:

huawei(config)#ipdr parameter ack-timeout
{ time<U><5,60> }:50

  Command:
          ipdr parameter ack-timeout 50

To reset the acknowledged records for an IPDR session to the default value, do as follows

huawei(config)#undo ipdr parameter ack-timeout

System Response

• The system does not display any message after the command is executed successfully.

MORE BLOG:

When downgrade failed on S5700-28X-PWR-LI-AC running V200R002C00SPC100

How to authenticate specific users on a interface

How to delete interface configuration using one command?