Function Description

This topic describes commands for configuring the voice service on the ONT port through the ONT Management and Control Interface (OMCI) protocol.

display ont-siprightflag-profile

Function

This command is used to query the information of the Session Initiation Protocol (SIP) rightflag profile on the optical network terminal (ONT).

Format

display ont-siprightflag-profile { profile-id profile-id | profile-name profile-name } *
display ont-siprightflag-profile all

Parameters

Parameter	Description	Value
all	Indicates all SIP rightflag profiles on the ONT.	-
profile-id profile-id	Indicates the profile ID. It uniquely identifies a profile. Profile 1 is the default profile. You are not allowed to add or delete profile 1, but you can modify it.	Numeral type. Range: 1-64.
profile-name profile-name	Indicates the profile name. It uniquely identifies a profile.	Character string type, a string of 1-32 characters.

Modes

Previllage mode, GPBD, GPBF

Level

Operator level

Usage Guidelines

You can query a profile by a combination of the profile name and profile ID. In this case, the profile name must match the profile ID.
You can run the ont-siprightflag-profile add command to add a service right profile and run the ont-siprightflag-profile modify command to modify a service data profile.

Example

To query the information about all ONT SIP rightflag profiles, do as follows:

huawei#display ont-siprightflag-profile
{ all<K>|profile-id<K>|profile-name<K> }:all

Command:
        display ont-siprightflag-profile all
  ------------------------------------------------------------------------------
  Profile-id                Profile-name
  ------------------------------------------------------------------------------
  1                         sip-rightflag-profile_1
  2                         siprightflag-profile-area
  ------------------------------------------------------------------------------
  Total:  2

To query the details of ONT SIP rightflag profile 2, do as follows:

huawei#display ont-siprightflag-profile                        
{ all<K>|profile-id<K>|profile-name<K> }:profile-id                     
{ profile-id-value<U><1,64> }:2
{ <cr>|profile-name<K> }:                                                       
                                                                                
  Command:                                                                      
         display ont-siprightflag-profile profile-id 2
  ------------------------------------------------------------------------------
  Profile ID                  : 2
  Profile name                : siprightflag-profile-area
  Call waiting                : enable
  Three party                 : enable
  Call transfer               : disable
  Call hold                   : enable
  Call park                   : disable
  Do not disturb              : disable
  Conference calling function : disable
  Message waiting indication  : disable
  Hotline                     : disable
  Hotline numbers             : -
  Hotline delay               : -
  ------------------------------------------------------------------------------

System Response

The system displays the queried result when the command runs successfully.
The following table describes the parameters in response to the display ont-siprightflag-profile all command.

Parameter Description

Profile ID Indicates the profile ID. It uniquely identifies a profile.

Profile name Indicates the profile name. It uniquely identifies a profile.

The following table describes the parameters in response to the display ont-siprightflag-profile profile-id 2 command.

Parameter	Description
Profile ID	Indicates the profile ID. It uniquely identifies a profile.
Profile name	Indicates the profile name. It uniquely identifies a profile.
Call waiting	Indicates whether to enable the call waiting service.
Three party	Indicates whether to enable the three-party service.
Call transfer	Indicates whether to enable the call transfer service.
Call hold	Indicates whether to enable the call hold service.
Call park	Indicates whether to enable the call park service.
Do not disturb	Indicates whether to enable the do-not-disturb service.
Conference calling function	Indicates whether to enable the conference call service.
Message waiting indication	Indicates whether to enable the message waiting indicator (MWI) service.
Hotline	Indicates whether to enable the hotline service.
Hotline numbers	Indicates whether to enable the hotline number of the hotline service.
Hotline delay	Indicates whether to enable the hotline delay service.

For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

Thunder-link.com

Tuesday, October 11, 2016

ONT Voice Service Management----display ont-siprightflag-profile