SHDSL Crosstalk Cancellation Group Configuration----shdsl cross-talk-cancellation-group deactivate

shdsl cross-talk-cancellation-group deactivate

Function

This command is used to deactivate a crosstalk cancellation group of the SHDSL line. When you need not use the crosstalk cancellation technology to cancel the crosstalk between lines, run this command. After a crosstalk cancellation group of the SHDSL line is deactivated, the crosstalk cancellation function on the chipset does not take effect any more.

Format

shdsl cross-talk-cancellation-group deactivate group-index

Parameters

Parameter	Description	Value
group-index	Indicates the index of a crosstalk cancellation group of the SHDSL line.	Numeral type. Range: SCU board: 0-63 MCUD/MCUD1: 0-15

Modes

SHDSL mode, OSN 3500, OSN 7500

Level

Operator level

Usage Guidelines

• Run the config command to enter global config mode, and then run the interface shl command to enter SHDSL mode.
• When you need to deactivate a crosstalk cancellation group, ensure that all the ports in the crosstalk cancellation group must be deactivated.
• After deactivating a crosstalk cancellation group, you can change or delete the crosstalk cancellation group but cannot activate the port in the crosstalk cancellation group independently.

Example

To deactivate a crosstalk cancellation group that contains four ports, do as follows:

huawei(config-if-shl-0/3)#shdsl cross-talk-cancellation-group
{ activate<K>|add<K>|deactivate<K>|delete<K>|modify<K> }:deactivate
{ group-index<U><0,63> }:0

  Command:
          shdsl cross-talk-cancellation-group deactivate 0   

System Response

• The system does not display any message after the command is executed successfully.

MORE BLOG:

What’s the Ethernet features in terms of function of the OptiX OSN 1500 V1R2?

When downgrade failed on S5700-28X-PWR-LI-AC running V200R002C00SPC100

How to authenticate specific users on a interface