Function Description
This topic describes the commands related to SHDSL line profile
configuration. The commands can be used to add, delete, edit, and query an
extended line profile.
shdsl line-profile delete
Function
This command is used to delete an SHDSL line profile. When an SHDSL line
profile is no longer useful, you can run the command to delete it. The
configuration data is deleted with the deletion of the SHDSL line profile and
cannot be restored.
Format
Parameters
|
Parameter |
Description |
Value |
|
profile-index |
Indicates the profile number. To delete a specified SHDSL line profile, use
this parameter. |
Numeral type. Range: 2-99.
|
Modes
Global config mode, SHDSL mode,
GPBD,
GPFD
Level
Usage Guidelines
- Run the config command to enter
global config mode, and then run the interface shl command to enter SHDSL
mode.
- The line profile bound to an SHDSL port cannot be deleted.
- There are nine default SHDSL line profiles which cannot be deleted but can
be modified. The profile numbers are 1 , 100, 101, 102, 103, 104, 105, 106 and
107.
Example
To delete SHDSL line profile 2, do as follows:
huawei(config)#shdsl line-profile delete
{ profile-index<U><2,99> }:2
Command:
shdsl line-profile delete 2
System Response
- The system does not display any message when you delete an SHDSL line
profile successfully
MORE BLOG:
No comments:
Post a Comment