xDSL Global Management----display xdsl upbo-ele-m0-calculation

display xdsl upbo-ele-m0-calculation

Function

This command is used to query configuration of the UPBO AELE-M0 mode for the current xDSL lines.

NOTE:

Only VDSL lines in TR165 or TR129 mode support this command.

Format

display xdsl upbo-ele-m0-calculation

Parameters

None

Modes

Diagnose mode, MA5608T, MA5683T

Level

Operator level

Usage Guidelines

None

Example

To query configuration of the UPBO AELE-M0 mode for the current xDSL lines, do as follows:

huawei(diagnose)%%display xdsl upbo-ele-m0-calculation
  -----------------------------------------------------------------
  Current mode : proprietary
  -----------------------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  Current mode	Indicates the UPBO AELE-M0 mode of current xDSL lines. proprietary: indicates the proprietary mode. min-ele-us: indicates the minimum electrical length mode for each upstream frequency band.

• For more information about the error message that the system displays against a command entered with incorrect syntax.

MORE BLOG:

What’s the Failure of I-Type PDU Backplane on MA5600T due to Overcurrent

How to Assemble an IMPI on the MA5620G?

What is the command lines that we can use on the OLT to detect PRTE board status