Board Transparent Transmission Channel Commands on emac dba display over-grant-record

The MA5680T/MA5683T/MA5608T supports the ETSI service subrack and the 19-inch service subrack.

Function

This command is used to query the over-grant records of a specified PON port. Over-grant is a situation in which a user applies for bandwidth excessively higher than the user's allocated bandwidth. The system supports over-grant recording for such abnormalities.

Format

emac dba display over-grant-record { oltid } { flag query_number }

Parameters

Parameter	Description	Value
oltid	Indicates the port ID.	Please see Differences Between Shelves.
flag	Indicates the type of the over-grant record to be queried.	Numeral type. Range: 1-3. Default: 3. 1: over-grant create records 2: over-grant cancel records 3: over-grant create and cancel records
query_number	Indicates the number of over-grant records to be printed.	Numeral type. Range: 0-256. Default: 20.

Modes

Diagnose mode

Level

Operator level

Usage Guidelines

• In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.
  
• Before running this command, run the transparent on(diagnose) command to enter transparent transmission channel mode.

Example

To query the over-grant records of PON port 0, do as follows:

huawei(diagnose)%%emac dba display over-grant-record
 { OLTID:<0..7>[0] }:0
 { flag(1:create;2:cancel;3:create&cancel)<1..3>[3] }:3
 { query_number(256:all):<0..256>[20] }:3
 -------------------------------------------------------------------
 Index       LLID            Create Time                  MAC
 -------------------------------------------------------------------
  1           3           2014-03-24 17:49:44         781d-baf1-2081
 -------------------------------------------------------------------
 Index       LLID            Cancel Time                  MAC
 -------------------------------------------------------------------
  1           3           2014-03-24 17:50:54         781d-baf1-2081

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  Index	Indicates the index of the over-grant create/cancel record.
  LLID	Indicates the LLID corresponding to the over-grant create/cancel record.
  Create Time	Indicates the over-grant record create time.
  Cancel Time	Indicates the over-grant record cancel time.
  MAC	Indicates the MAC address corresponding to the over-grant create/cancel record.

More related:

Does the UA5000 MSAN support Radius accounting?

ADSL2+ service(ADEE service boards not working due to Damaged protection fuses (F1))

End-to-End GE Services Cannot Be Created on the OptiX OSN 6800