Function
This command is used to query the configuration of the multiple spanning tree
(MST) that is validated. In this case, you can judge what configuration needs to
be activated manually.
Usage Guidelines
- Run the config command to enter global config mode, and then run the stp region-configuration command to enter MST region mode.
- When you query the validated configuration of the MST region, refer to the following description for details of the parameters.
Example
To query the configuration of the MST region, do as follows:
huawei(stp-region-configuration)#display stp region-configuration
Oper configuration
Format selector :0
Region name :00e0fc995050
Revision level :0
Instance Vlans Mapped
0 1 to 4094
System Response
- The system displays the queried result when the command runs successfully.
- The following table describes the parameters in response to the
display stp region-configuration command.
Parameter Description Format selector Indicates the selection factor specified by the MSTP protocol. Region name Indicates the MST region name. Revision level Indicates the revision level of the MST region. Instance Vlans Mapped Indicates the mapping relation between the spanning tree example of the MST region and the VLAN.
More blog:
No comments:
Post a Comment