Board Transparent Transmission Channel Commands on emac encrypt display llidmode

The MA5680T/MA5683T/MA5608T supports the ETSI service subrack and the 19-inch service subrack.

Function

This command is used to query the encryption mode of a specified terminal connected to a specified PON port.

Format

emac encrypt display llidmode { oltid } { llid }

Parameters

Parameter	Description	Value
oltid	Indicates the port ID.	Please see Differences Between Shelves.
llid	Indicates the logical link identifier (LLID) of the terminal.	Numeral type. Range: 1-255.

Modes

Diagnose mode

Level

Operator level

Usage Guidelines

• In the privilege mode or global config mode, run the diagnose command to enter the Diagnose mode.
  
• Before running this command, run the transparent on(diagnose) command to enter transparent transmission channel mode.

Example

To query the encryption mode of the terminal with LLID 3 on PON port 0, do as follows:

huawei(diagnose)%%emac encrypt display llidmode
 { OLTID:<0..7>[0] }:0
 { LLID:<1..255>[0] }:3
EncryptionMode:    None

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  EncryptionMode	Indicates the encryption mode. None: Indicates that the terminal is not encrypted. AES128: Indicates the AES128 encryption mode. Triple churning(CTC): Indicates the triple churning encryption mode.

More blog:

Comunication failure between the GSCC and EOW Gateway NE

Broadcast storm occured in S5300 when STP was ruuning

When abnormal NE Login Caused by Incorrect NE Subnet Mask.