GPON Global Parameter Configuration about display xpon ont-interoperability-mode

Function

This command is used to query the GPON ONT interoperability mode, control mode of the GPON ONT controllable multicast, GPON T-CONT PQ priority reverse function, and configuration mode of the ONT WAN port.

Format

display xpon ont-interoperability-mode gpon [ vendor { vendor-id | hex vendor-id } [ equipment { equipment-id | hex equipment-id } [ software-version software-version ] ] ]

Parameters

Parameter	Description	Value
gpon	Indicates the GPON mode.	-
vendor {vendor-id | hex vendor-id }	Select hexadecimal type or character string type in querying the information by the ONT vendor ID.	Character string type, a string of 1-4 characters. Hexadecimal type, a string of 1-8 characters. Characters should be 0-9, a-f, or A-F.
equipment { equipment-id | hex equipment-id }	Select hexadecimal type or character string type in querying the information by the ONT equipment ID.	Character string type, a string of 1-20 characters. Hexadecimal type, a string of 1-40 characters. Characters should be 0-9, a-f, or A-F.
software-version software-version	Query the information by the ONT software version.	Character string type, a string of 1-14 characters.

Modes

H807GPBD, H805GPBD

Level

Operator level

Usage Guidelines

You can use the xpon ont-interoperability-mode gpon command to set the GPON ONT interoperability mode, control mode of the GPON ONT controllable multicast, GPON T-CONT PQ priority reverse function, and configuration mode of the ONT WAN port.

Example

To query the GPON ONT interoperability mode, control mode of the GPON ONT controllable multicast, information about the GPON T-CONT PQ priority reverse function, and configuration mode of the ONT WAN port, do as follows:

huawei#display xpon ont-interoperability-mode 
{ gpon<K> }:gpon
{ <cr>|vendor<K> }:
  
  Command:
          display xpon ont-interoperability-mode gpon
  -----------------------------------------------------------------------------
   ONT interoperability standard    : ITU-T
   ONT multicast-auth mode          : ONT control
   T-CONT PQ priority reverse switch: disable
   ONT WAN config mode              : set-after-create
  -----------------------------------------------------------------------------
   ONT vendor ID                    : HWTC(0X48575443)
   ONT equipment ID                 : -
   ONT software version information : -
   ONT interoperability standard    : CTC
   ONT multicast-auth mode          : ONT control
   ONT WAN config mode              : set-by-create
  -----------------------------------------------------------------------------
   The total of interoperability rules : 2               
  -----------------------------------------------------------------------------

To query the GPON ONT interoperability mode and the control mode of the GPON ONT multicast for the ONT with a vendor ID of HWTC, and configuration mode of the ONT WAN port, do as follows:

huawei(config)#display xpon ont-interoperability-mode
{ gpon<K> }:gpon
{ <cr>|vendor<K> }:vendor
{ hex<K>|vendor-id<S><Length 1-4> }:HWTC
{ <cr>|equipment<K> }:

  Command:
          display xpon ont-interoperability-mode gpon vendor HWTC
  -----------------------------------------------------------------------------
   ONT vendor ID                    : HWTC(0X48575443)
   ONT equipment ID                 : -
   ONT software version information : -
   ONT interoperability standard    : CTC
   ONT multicast-auth mode          : ONT control
   ONT WAN config mode              : set-by-create
  -----------------------------------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  ONT interoperability standard	Indicates the GPON ONT interoperability mode. Options: CTC, ITU-T, ITU-T G.988, ITU-T G.984, Eric V1 and Eric V2.
  ONT multicast-auth mode	Indicates the control mode of the GPON ONT multicast. Options: ONT-control and OLT-control.
  T-CONT PQ priority reverse switch	Indicates the GPON T-CONT PQ priority reverse function. Options: disable and enable.
  ONT WAN config mode	Indicates the configuration mode of the ONT WAN port. Options: set-after-create and set-by-create.
  ONT vendor ID	Indicates the vendor ID of the ONT. The characters in the parenthesis are hexadecimal characters. When the vendor ID contains invisible characters, only the corresponding hexadecimal characters are displayed.
  ONT equipment ID	Indicates the ONT equipment ID. The characters in the parenthesis are hexadecimal characters. When the equipment ID contains invisible characters, only the corresponding hexadecimal characters are displayed. When the equipment ID is not configured, "-" is displayed.
  ONT software version information	Indicates the ONT software version information. When the ONT software version information is not configured, "-" is displayed.

More related:

How to precaution the using problem of Huawei MA5603T product?

How to check service board detail information?

What is the command lines that we can use on the OLT to detect PRTE board status