GPON Global Parameter Configuration about display tcont auto-combine state

Function

This command is used to query the status of the T-CONT auto-combine function. When you need to use the T-CONT auto-combine function, run this command to query whether this function is enabled or not.

Format

display tcont auto-combine state

Parameters

None

Modes

GPON board, GPBD, GPFD

Level

Operator level

Usage Guidelines

None

Example

To query the status of the T-CONT auto-combine function, do as follows:

huawei#display tcont auto-combine state
 --------------------------------------------------------------
       The state of T-CONT auto-combine switch: disable
 --------------------------------------------------------------

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to the display tcont auto-combine state command.

  Parameter	Description
  The state of T-CONT auto-combine switch	Indicates the status of the T-CONT auto-combine function, including enable and disable.

More related:

When Prewarning on Service Unavailability of H806GPBH & H806GPBD Boards of MA5600T

How to precaution the using problem of Huawei MA5603T product?

Interconnection Between the OLT and the Switch Fails