GPON Global Parameter Configuration about display special-portid

Function

This command is used to query the settings for the multicast GEM port in the system. When you need to query the GEM port reserved in the system for the multicast packets, run this command.

Format

display special-portid

Parameters

None

Modes

Privilege mode

Level

H807GPBD, H805GPBD

Usage Guidelines

By default, the GPON multicast GEM port is 4095, and the XG-PON multicast GEM port is 65534.

Example

To query the settings for the multicast GEM port in the system, do as follows:

huawei#display special-portid
  ------------------------------------                                                  
  Multicast GEM port       : 4095                                                      
  XG-PON multicast GEM port: 65532                                              
  ------------------------------------  

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  Multicast GEM port	Indicates the GEM port taken by the GPON multicast data frames.
  XG-PON multicast GEM port	Indicates the GEM port taken by the XG-PON multicast data frames.

More related:

What Is the Calculation Method for Load Balancing of the Upstream Aggregation Ports of the MA5680T?

What’s the Failure of I-Type PDU Backplane on MA5600T due to Overcurrent

How to Assemble an IMPI on the MA5620G?