GPON Global Parameter Configuration about display ont port attribute catv default-operational-state

Function

This command is used to query the default status of the ONT CATV port.

Format

display ont port attribute catv default-operational-state

Parameters

None

Modes

MA5683T,MA5680T,MA5608T

Level

Operator level

Usage Guidelines

By default, the status of the ONT CATV port is ON.

Example

To query the default status of the ONT CATV port, do as follows:

huawei(config)#display ont port attribute catv default-operational-state

  Command:
          display ont port attribute catv default-operational-state
  Current default state of ONT CATV port:   OFF 

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  Current default state of ONT CATV port	Indicates the default status of the ONT CATV port. Options: ON and OFF. You can run the ont port attribute catv default-operational-state command to set the default status of the ONT CATV port.

More related:

When abnormal NE Login Caused by Incorrect NE Subnet Mask.

When Failed to get the SNCP state of N3EAS2 board, NMS error code 38752

When unable to configure OSN1800 using built in WebLCT TL1 without need U2000 or WebLCT on laptop?