Board Transparent Transmission Channel Commands on emac encrypt display portmode(debugging)

Function

This command is used to query the encryption mode of a specified PON port.

Format

emac encrypt display portmode { oltid }

Parameters

Parameter	Description	Value
oltid	Indicates the port ID.	Please see Differences Between Shelves.

Modes

Diagnose mode, GPBD, GPON 

Level

Operator level

Usage Guidelines

Before running this command, run the transparent on(diagnose) command to enter transparent transmission channel mode.

Example

To query the encryption mode of PON port 0, do as follows:

huawei(diagnose)%%emac encrypt display portmode
 { OLTID:<0..7>[0] }:0
EncryptionMode:    None

System Response

• The system displays the queried result when the command runs successfully.
• The following table describes the parameters in response to this command.

  Parameter	Description
  EncryptionMode	Indicates the encryption mode. None: Indicates that the PON port is not encrypted. AES128: Indicates the AES128 encryption mode. Triple churning(CTC): Indicates the triple churning encryption mode.

More blog:

When Failed to get the SNCP state of N3EAS2 board, NMS error code 38752

When unable to configure OSN1800 using built in WebLCT TL1 without need U2000 or WebLCT on laptop?

When End-to-End GE Services Cannot Be Created on the OptiX OSN 6800?